The Behringer DI600P Passive Direct Box lets you connect instruments or amplifier outputs of up to 3,000 Watts. The Ultra-DI converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, the Behringer DI600P also allows you to use very long cables without the loss of high frequencies.
Click here to [...]
Filed under: Direct Boxes on August 22nd, 2008 | No Comments »
The Behringer DI400P Passive Direct Box lets you connect instruments or amplifier outputs to your mixer. The Ultra-DI converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, the Behringer Ultra-DI also allows you to use very long cables without the loss of high frequencies.
Click here to buy this [...]
Filed under: Direct Boxes on August 21st, 2008 | No Comments »
The innovative, active 2-channel Behringer DI20 Ultra DI 2-Channel Active DI Box/Splitter takes the signal directly from an unbalanced high-impedance output like an electric guitar and feeds it directly into a mixing console or recorder. It is ideally suited to augment the traveling gear of musicians (especially guitar/bass players) as well as live/studio/broadcast engineers, installation [...]
Filed under: Direct Boxes on August 17th, 2008 | No Comments »
The Behringer Ultra-DI DI-100 Direct Box puts an end to hum and impedance problems. It features an extremely flat frequency response and ultralow noise for superior audio quality. An internal battery is automatically decoupled when phantom power is used. Solid metal chassis and 4 sturdy rubber legs protect the Ultra-DI from damage on tour. Frequency [...]
Filed under: Direct Boxes on August 13th, 2008 | No Comments »
The Behringer DI4000 Ultra-DI Pro Direct Box makes it easy to connect several signals to your console without hum or other noises. Up to 40dB of switchable input attenuation lets you connect anything from unbalanced line and instrument signals, to an amp's output with up to 3,000W. There's even a built-in preamp to pump up [...]
Filed under: Direct Boxes on August 12th, 2008 | No Comments »
Powered by an internal 9-volt battery or via phantom power at the XLR output, the Xdirect Active Direct Box from ART features a switchable low-pass filter that cuts out all very high-frequency interference. This Bessel filter on the output is placed out of the audio range and is primarily intended to reduce radio frequency interference [...]
Filed under: Direct Boxes on July 20th, 2008 | No Comments »
The Zdirect Professional Passive Direct Box is a high-quality interface that lets you connect instrument, line, or speaker-level signals to a mixer or other balanced input through a high-performance audio isolation transformer. The high-impedance, single-ended 1/4" input is converted by the transformer into an isolated balanced low-impedance signal output. Extremely flat and wide frequency response [...]
Filed under: Direct Boxes on July 19th, 2008 | No Comments »
ART designed the 2-Way CleanBOX to connect RCA to XLR, unbalanced to balanced, or to properly match signal levels. RCA-to-XLR takes RCA signal, matches the signal levels, and then provides a balanced XLR output. Simply reverse connections to convert balanced XLR to unbalanced RCA and match signal levels. Its 2-channel operation will even allow you [...]
Filed under: Direct Boxes on July 16th, 2008 | No Comments »
The PDB is a roadworthy passive DI for connecting electric instruments and other audio outputs to the balanced inputs of mixers and other balanced inputs. It allows connection to an instrument amp while simultaneously patching it to a mixer. The PDB translates high-impedance signals from instruments into low-impedance balanced signals required by mixers. It also [...]
Filed under: Direct Boxes on July 16th, 2008 | No Comments »
The Radial ProAV2 is a passive direct box specifically developed with the audio-video integrator in mind. It has full two-channel stereo functionality.To eliminate the need for various adaptor, a "Swiss Army" array of connections are provided, including 1/4" for instruments, RCA and 1/8" connectors for consumer electronics and computers, and a +4dB XLR input for [...]
Filed under: Direct Boxes on June 23rd, 2008 | No Comments »
Home Recording Studio News