Home Recording Studio Center

The Plugable USB2-HUB-AG7 is a premium 7 Port High Speed USB 2.0 Hub that is designed to maximize compatibility with USB 2.0 devices, including power-hungry USB-powered hard drives, scanners, etc, with its provided 3A power supply. Supplies up to (but not more than) the 500mA per port/device specified by USB 2.0.
Hub ControllerCascaded Terminus Technology chipsets support efficient data transfers…

Click here to learn more about Plugable 7 Port High Speed USB 2.0 Hub with 3A Power Adapter

CoolerMaster HAF 932 System Cabinet – Full-tower – Black – Steel, Plastic RC-932-KKN5-GP Computer Chassis…

Click here to learn more about Cooler Master HAF 932 Advanced Full Tower Case with SuperSpeed USB 3.0 (RC-932-KKN5-GP)

Startech Bracket for 3.5 Inch Floppy with Bezel BRACKETFDBK 696…

Click here to learn more about StarTech 3.5-Inch to 5.25-Inch Floppy Mounting Kit Bracket (Black Plastic)

…

Click here to learn more about Arkon Front Seat Car Mount for iPad 1G

Supports a max load of 450VA/280 watts for 4 minutes. Supports a half load of 225VA/140 watts for 15 minutes. Supplies battery derived AC output during brownouts starting at 99 volts. Attractive small footprint gray tower configuration. USB port, PowerAlert software and cabling offer safe unattended shutdown without data loss during extended outages. Built-in single line Tel/DSL line surge suppres…

Click here to learn more about 450 Va Ups Built-In Single Line Surge Suppression 3 Front Panel Leds Indicate Power by Tripplite

The RaXXess SFG flanged steel rack panel features 16-gauge, cold rolled steel; it has a 1/2 inch flanged for additional strength. Perfect for use where economy is the key. Textured finish as well.

Click here to learn more about RaXXess SFG Flanged Steel Rack Panel

CBI 16×8 Audio Snakes feature top quality components and construction including Neutrik hand-soldered 16 XLR and 8 TRS panel mounts in the stage box; CBI XLR nickel connectors on the fan; and 14/16 gauge rolled steel stage box construction.

Click here to learn more about CBI 16 X 8 Audio Snake with Neutrik Connectors

Rack mounting kit for Evolution Wireless G3 rackmountable devices. Will not mount G1 or G2 devices. Supports up to 2 systems, or one system with AM2 front panel antenna.

Click here to learn more about Sennheiser GA3 Rack Kit

CBI 24×8 Audio Snakes feature top quality components and construction including Neutrik hand-soldered 24 XLR and 8 TRS panel mounts in the stage box; CBI XLR nickel connectors on the fan; and 14/16 gauge rolled steel stage box construction. Other features include Belden CBI individually shielded multipair wire with a flexible black PVC jacket. The fanouts provide double layer heat shrink at the connection and junction and the box features a durable hammered enamel finish. 10 year warranty.

Click here to learn more about CBI 24 X 8 Audio Snake with Neutrik Connectors

CBI 32×8 Audio Snakes feature top quality components and construction including Neutrik hand-soldered 32 XLR and 8 TRS panel mounts in the stage box; CBI XLR nickel connectors on the fan; and 14/16 gauge rolled steel stage box construction. Other features include Belden CBI individually shielded multipair wire with a flexible black PVC jacket. The fanouts provide double layer heat shrink at the connection and junction and the box features a durable hammered enamel finish. 10 year warranty.

Click here to learn more about CBI 32 X 8 Audio Snake with Neutrik Connectors

New 10-1/2 in. depth X-Racks accommodate smaller rackmountable equipment such as guitar effects and shallow depth studio effects. Why mount that stuff in larger racks when you don’t need all of that extra depth and weight? With an X-Rack, you need not unplug these components to close the back panel. The X-Rack features a molded-in carry handle. Best of all, you can stack it right on top of your amp.

Click here to learn more about SKB 2-Space X-Rack Effect/Amp Rack (10.5-inch Deep)

New 10-1/2 in. depth X-Racks accommodate smaller, rackmountable equipment such as guitar effects and shallow-depth studio effects. Why mount that stuff in larger racks when you don’t need all of that extra depth and weight? With an X-Rack, you need not unplug these components to close the back panel. The X-Rack features a molded-in carry handle. Best of all, you can stack it right on top of your amp.

Click here to learn more about SKB 3-Space X-Rack Effect/Amp Rack (10.5-inch Deep)

New 10-1/2 in. depth X-Racks accommodate smaller rackmountable equipment such as guitar effects and shallow depth studio effects. Why mount that stuff in larger racks when you don’t need all of that extra depth and weight? With an X-Rack, you need not unplug these components to close the back panel. The X-Rack features a molded-in carry handle. Best of all, you can stack it right on top of your amp.

Click here to learn more about SKB 4-Space X-Rack Effect/Amp Rack (10.5-inch Deep)

The RaXXess EVP is an inexpensive flanged panel for passive cooling; 16-gauge, cold rolled steel; smooth finish. Provides more breathing room and cooling to your rack gear.

Click here to learn more about RaXXess EVP Economy Vent Panel

The perfect feature for every rack has now arrived with the Gator Powered Rack! This revolutionary rack contains everything you need for your rackable gear. A built-in power distribution center provides 5 power sources, 15-amp push to reset circuit breaker, and front panel on/off control with pilot light. In addition, it has surge protection to keep your gear safe against power spikes!

Click here to learn more about Gator GRR8PLUS 8-Space Powered Lockable Rolling Rack

Mounting panel for the Engl Z-7 MIDI interface and Z-11 MIDI switcher.

Click here to learn more about Engl Z-8 Rack Mounting Panel

Designed to accommodate entry-level DJ gear, the “DJ Capsule” is roto-molded in the Roto X pattern with molded-in side handles and a durable snap closure for protection making the DJ Capsule lightweight yet durable. The SKB-82DJ offers 8 rackable spaces on top and 2 rackable spaces underneath making it convenient for loading CD’s or equipment and has a rear access panel for easy access and storage.

Click here to learn more about SKB 82DJ DJ Capsule Rack

The rackmountable Alesis MultiMix 12R Rack Mixer offers ultrahigh-quality mic preamps, balanced XLR inputs, phantom power, and 60mm faders on each of 8 primary channels. Features 2 bands of shelving EQ at 12kHz and 80Hz for tonal adjustment, 2 aux send controls (one pre-fader and one post-fader) for use as monitor returns or flexible routing schemes, and individual insert points on each channel that allow you to record 8 tracks while simultaneously outputting a stereo mix to a PA system. It also has tape I/O on phono plug connectors. Valuable as a tool for home/project studio recording and instrument line mixing or remote broadcast applications.Ultra-affordable 12-channel mixer in a 3U rack 8 high-gain mic/line (XLR and 1/4″ balanced) inputs with phantom power, 2 stereo balanced 1/4″ line inputs 2 aux sends (pre- and post-fader), stereo aux return, 8 1/4″ inserts, 2-track stereo RCA in and out Separate 1/4″ balanced main and monitor outs, front-panel headphone out Pan control, peak indicator, and 60mm fader on each channel 2-band high/ low shelving EQ per channel 10-segment LED stereo meters

Click here to learn more about Alesis Multimix 12R Rack Mixer

The pre-assembled Raxxess dual-fan rack panel boasts ultra-quiet fans mounted in a brushed, black anodized aluminum panel with wire fan guards. AC adapter included. Rated at 28dBA per fan. 3 rackspaces.

Click here to learn more about Raxxess Quiet Dual Fan Rack Panel

The quiet Raxxess single fan rack panel ships pre-assembled. Ultraquiet fan is mounted to a brushed, black anodized aluminum panel with wire fan guards. AC adapter included. Rated at 28dBA per fan. 3 rackspaces.

Click here to learn more about Raxxess Quiet Single Fan Rack Panel

The quiet Raxxess single fan rack panel ships pre-assembled. Ultraquiet fan is mounted to a brushed, black anodized aluminum panel with wire fan guards. AC adapter included. Rated at 28dBA per fan. 3 rackspaces.Ultraquiet fanPre-assembled kitBrushed, black anodized aluminum panelFan guardsAC adapter includedRated at 28dBA2RU

Click here to learn more about Used Raxxess Quiet Single Fan Rack Panel