Home Recording Studio Center

Specs:
Image Compression Format: M-JPEG standard
Image Resolution: VGA(640×480) / QVGA(320×240)
Sensor: 1/4 inch CMOS, 300,000 Pixels
Light frequency: 50Hz, 60Hz or Outdoor
Audio compression: ADPCM
Data rate: 802.11b: 11Mbps (Max.), 802.11g: 54Mbps (Max.)
Ethernet: One 10/100Mbps RJ-45
Viewing angle: 67?
Horizontal Rotating Angle: 0~270?
Vertical Rotating Angle: 0~120?
Alarm Mode: motion detection…

Click here to learn more about Wireless IP Pan/Tilt/ Night Vision Internet Surveillance Camera Built-in Microphone With Phone remote monitoring support(Black)

Specs:
Image Compression Format: M-JPEG standard
Image Resolution: VGA(640×480) / QVGA(320×240)
Sensor: 1/4 inch CMOS, 300,000 Pixels
Light frequency: 50Hz, 60Hz or Outdoor
Audio compression: ADPCM
Lens: f: 3.6mm, F:2.4 (IR Lens)
Data rate: 802.11b: 11Mbps (Max.), 802.11g: 54Mbps (Max.)
Ethernet: One 10/100Mbps RJ-45
Viewing angle: 67º
Horizontal Rotating Angle: 0~270º
Vertical Rotating Angle: 0…

Click here to learn more about Wansview Wireless IP Pan/Tilt/ Night Vision/ Internet Surveillance Camera Built-in Microphone With Phone remote monitoring support

D’Addario Planet Waves Cables. Model Number: PW-ECT-10….

Click here to learn more about Planet Waves Elastic Cable Ties, 10-pack

Why should you bother with a bulky interface, when all you want to do is plug a single microphone into your computer? With a Blue Icicle in your arsenal, you can turn any microphone into a totally streamlined, USB-ready recording device. Instead of lugging around some fancy rack and a bunch of outboard gear, just toss an Icicle and a mic in your laptop bag, and take your studio straight to the sou…

Click here to learn more about Blue Microphones Icicle XLR to USB Mic Converter/Mic Preamp

If a lack of money and floor space is all that’s been standing between you and a home recording studio full of the finest vintage guitar amps and effects pedals, get ready to love the Behringer V-Amp 3 multi-effects processor. This red rocker comes loaded with 32 amp models, 15 speaker cabinet models and 16 classic effects. But that’s only the beginning you also get the UCA222 USB audio interface …

Click here to learn more about Behringer V-AMP3 Next-Generation Virtual Guitar Amplifier with USB Audio Interface And Energyxt2.5 Recording Software

Money-saving pack includes 6 Nady SP-R3 mics, 6 – 20′ cables, and a 6-space padded nylon bag with a zippered pouch for cable storage. See #277021 for Nady Starpower SP-R3 microphone details.

Click here to learn more about Nady SP-R3 Mic 6-Pack with Cables and Mic Bag

Complete Nady SP-9 Microphone system includes: 6-space mic gig bag 6 Nady SP-9 mics 6 – 20′ mic cables

Click here to learn more about Nady SP-9 Mic Package #1

Mic up the whole band with this package deal. Includes 2 SM58s for vocals, 4 SM57s for everything else, plus 6 20ft. XLR microphone cables and a Gator GM15TSA Deluxe 15 Microphone ATA Case to tote everything around in.

Click here to learn more about Shure SM57 and SM58 Microphone Package

The Mic Holders Drum Microphone Mounting System Package has everything you need to get your drum set mic’d and ready to rock. With this Drum Mic Mounting System Pack there’s no need for any mic stands or bulky claw attachments.

Click here to learn more about Mic Holders Drum Microphone Mounting System Package

The Mic Holder MHHH Hi Hat Mount is a unique drum mic mounting system. Mic Holder eliminates the need for any mic stands or bulky claw attachments to mic your kit. They are compact and can be left permanently attached to your hardware.

Click here to learn more about Mic Holders Hi-Hat Stand Microphone Mount

The AMT LSW Clip On Condenser Microphone is the ultimate in a woodwind or brass microphone and designed for direct connection to Shure or Sabine belt pack wireless systems. The mic system is meant to clip onto a flanged bell instrument. (Saxophones and Brass). The AMT LSW – Shure Microphone System is meant to be used by the player that requires a multi-channel professional level wireless system. (AMT Recommends the Shure ULXS14 and the ULXP14 wireless units). The AMT LSW allows the player to easily convert their direct connecting wireless microphone to any AMT preamp version. With a change in a cable, you can convert your LS from a “W”ireless setup, to a “Belt pack”, or the AMT “Studio” series. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. It is powered via the wireless beltpack. This LSW system comes with microphone, universal clamp, case, and AMT disconnecting cable technology to allow the microphone to be used as “W”ireless or “BP” models if needed. (Additional cables for a variety of setups sold separately. The AMT Interface is also sold separately to allow connections for many wireless mic systems). Requires phantom power.Clip-On Condenser Microphone for a woodwind or brass instrument”Off the bell” clamping systemConverts from an LS “W”ireless setup , to a “Belt pack” model, or the AMT Studio setupIncludes soft case and cables

Click here to learn more about Applied Microphone Technology Amt Lsw Clip-On Mic For Shure Systems

Complete Nady SP-9 Microphone system includes:6-space mic gig bag 6 Nady SP-9 mics6 – 20′ mic cables

Click here to learn more about Nady Sp-9 Microphone Package #1

This package includes 5 Musicians Gear Tripod Mic Stands with telescoping boom, and 5 XLR microphone cables that are each 20-feet in length. The Musicians Gear Microphone Stands are all very stable and durable. Each stand has a thread adapter, tubular legs design, metal tuning clamp, aluminum alloy base, and black finish. The telescoping boom provides precision placement that is perfect for miking up drums and amps, or for any other studio microphone application.5 x Musicians Gear Tripod Mic Stands with telescoping boom5 x 20 FT Microphone Cables

Click here to learn more about Musician’s Gear Tripod Mic Stand With 20 Foot Mic Cable 5-Pack

This package includes 3 Musicians Gear Tripod Mic Stands with telescoping boom, and 3 XLR microphone cables that are each 20-feet in length. The Musicians Gear Microphone Stands are all very stable and durable. Each stand has a thread adapter, tubular legs design, metal tuning clamp, aluminum alloy base, and black finish. The boom provides precision placement that is perfect for miking up drums and amps, or for any other studio microphone application.3 x Musicians Gear Tripod Mic Stands with fixed boom3 x 20 FT Microphone Cables

Click here to learn more about Musician’s Gear Tripod Mic Stand With 20 Foot Mic Cable 3-Pack

The Rolls MP13 Mini-Mic microphone preamplifier is a small, simple, and inexpensive microphone pre amplifier for a variety of applications. The unit has XLR and 1/4 inch Outputs, XLR and 1/8 inch Inputs, and a single Gain control with a Clip indicator. Switchable Phantom Power is included for use with a condenser microphone. The unit comes complete with a power adapter.

Click here to learn more about Rolls MP13 Mini-Mic Microphone Preamplifier

The AMT LSW Clip On Condenser Microphone is the ultimate in a woodwind or brass microphone and designed for direct connection to Shure or Sabine belt pack wireless systems. The mic system is meant to clip onto a flanged bell instrument. (Saxophones and Brass). The AMT LSW — Shure Microphone System is meant to be used by the player that requires a multi-channel professional level wireless system. (AMT Recommends the Shure ULXS14 and the ULXP14 wireless units). The AMT LSW allows the player to easily convert their direct connecting wireless microphone to any AMT preamp version. With a change in a cable, you can convert your LS from a “W”ireless setup, to a “Belt pack”, or the AMT “Studio” series. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. It is powered via the wireless beltpack. This LSW system comes with microphone, universal clamp, case, and AMT disconnecting cable technology to allow the microphone to be used as “W”ireless or “BP” models if needed. (Additional cables for a variety of setups sold separately. The AMT Interface is also sold separately to allow connections for many wireless mic systems). Requires phantom power.

Click here to learn more about Applied Microphone Technology AMT LSW Clip-On Mic for Shure Systems

On-Stage Gear Microphone bags make protecting and transporting your valuable microphones easier than ever. This fully padded bag encases a dense foam insert to accommodate most popular handheld mic designs, while a separate compartment with a removable hook-and-loop divider provides room for cables and clips.

Click here to learn more about On-Stage MB7006 Microphone Carry Bag, 6-Space

IK Multimedia iRig Mic is the first handheld, quality condenser microphone for iPhone, iPod touch and iPad designed for all of your mobile sound needs. Now you can make professional audio and vocal recordings anywhere on your iOS device.

Click here to learn more about IK Multimedia iRig Mic Microphone for iPhone and iPad

The CBI MLN Performer Series mic cables are extremely flexible and durable cables. They are constructed with Beldens 22-gauge, 2-conductor super low noise, ultra flexible audio cable, then fitted to Neutrik male and female XLR connectors.

Click here to learn more about CBI LowZ Microphone Cable with Neutrik Connectors

This package includes 2 Musicians Gear Tripod Mic Stands with fixed booms, 2 XLR microphone cables that are each 20-feet in length. The Musicians Gear Microphone Stands are all very stable and durable. Each stand has a thread adapter, tubular legs design, metal tuning clamp, aluminum alloy base, and black finish. Its adjustable height from floor to top thread is 35″ to 61-7/8″. The 30-1/4″ fixed boom is not adjustable.2 x Musicians Gear Tripod Mic Stands with fixed boom2 x 20 FT Microphone Cables

Click here to learn more about Musician’s Gear Tripod Mic Stand With 20 Foot Mic Cable 2-Pack

This package includes 10 Musicians Gear Tripod Mic Stands with fixed booms, and 10 XLR microphone cables that are each 20-feet in length. The Musicians Gear Microphone Stands are all very stable and durable. Each stand has a thread adapter, tubular legs design, metal tuning clamp, aluminum alloy base, and black finish. Their adjustable height from floor to top thread is 35″ to 61-7/8″. The 30-1/4″ fixed boom is not adjustable.10 x Musicians Gear Tripod Mic Stands with fixed booms10 x 20 FT Microphone Cables

Click here to learn more about Musician’s Gear Tripod Mic Stand With 20 Foot Mic Cable 10-Pack

Now you don’t have to be a superstar to use a microphone with a custom look. The Audio-Technica ATR-1205 comes supplied with four themed mic wraps that fit snugly around the microphone, transforming its look effortlessly from Tribal’s red-on-black heavy metal vibe, to the aggressive silver/black Boom, the artful splatter of Jackson, and cheerful Cutie.

Click here to learn more about Audio-Technica ATR1205 Dynamic Microphone with Mic Wraps

Mic Holders drum microphone mount eliminates the need for any mic stands or bulky claw attachments to mic your kit. They are compact and can be left permanently attached to your hardware. This also means less need for floor space and less clutter around your kit.

Click here to learn more about Mic Holders MHTT Tom Tom/Snare Drum Microphone Mount