Home Recording Studio Center

The Musicians Gear SP-58 Steel Mesh Mic Grille is a perfect replacement for your aged, dinged or dented microphone grille. This durable wire mesh grille features die-cast zinc sphere retainer rings and an inner foam filter to reduce wind, breath, and pop noises. Standard thread size fits most brand name ball-shaped dynamic microphones.

Click here to learn more about Musician’s Gear Mesh Microphone Grill Silver Fits Sm-58

Protect your mics against wind interference, singers’ spit, and maybe even Steven Tyler’s lips (no guarantees).

Click here to learn more about On-Stage Foam Ball-Type Microphone Windscreen

Whether you're on the road or at the gig, Gator's EVA foam wireless microphone case is a dual functional protective case for most common-sized half-rack wireless units. On the road it has a rigid, 5mm EVA rubber foam design and can hold the wireless receiver, a microphone, power supply, beltpack transmitter, and lapel microphones. When you're at your gig, there's no need to take your receiver out of the case as it has zippered access to the front, back, and top to allow you to plug in, make adjustments, and even give your antennas room to do their job.

Click here to learn more about Gator Eva Foam Wireless Microphone Case

Gator’s GM-6 microphone case is molded from ABS plastic and is lined with thick die-cut foam to fit 6 microphones. The durable latches are triple chrome plated.

Click here to learn more about Gator GM6 Deluxe 6 Microphone Hard Case

The Rode Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2 and NTG3 microphones, as well as any third party shotgun microphone up to 325mm in length.

Click here to learn more about Rode Blimp Foam Windshield Suspension System

The V89 is a serious studio condenser microphone that can tackle any recording task — from the natural tonality of your favorite guitar, to the subtle detail of a fine piano, or the raw attack of screaming vocals. The custom body design minimizes body resonance, while a tuned grill cavity helps eliminate standing waves and reduces harmonic distortion. The V89 provides the kind of sonic integrity you’d expect from a microphone priced thousands of dollars and will leave you wondering how you ever lived without it!

Click here to learn more about MXL V89 Large Diaphragm Condenser Microphone

This 12-hole mic case features heavy-duty handle and locking latches and holds 12 microphones in foam compartments. It also includes extra storage in the lid and a side compartment.

Click here to learn more about SKB Microphone Case (Large)

The MXL V67G sports a gold plated round grill and distinctive vintage brass body design. It was designed for vocals, so this mic will surely stand out in any crowd. The V67G sounds as golden as its looks. Its 1″ gold sputtered, 6-micron diaphragm, FET preamp and transformer balanced output combine to create an open, vintage sound. The double screen, round grill, also helps to produce a smooth, even frequency response. It comes complete with stand adapter and an optional high isolation shock mount is available.

Click here to learn more about MXL V67G Studio Condenser Microphone

This microphone windscreen reduces wind, breath sounds and popping noises. Also keeps your mic clean and helps extend its lifetime. This windscreen will fit most standard mics.

Click here to learn more about Musician’s Gear Microphone Windscreen Red Foam

This microphone windscreen reduces wind, breath sounds and popping noises. Also keeps your mic clean and helps extend its lifetime. This windscreen will fit most standard mics.

Click here to learn more about Musician’s Gear Microphone Windscreen Black Foam

This microphone windscreen reduces wind, breath sounds and popping noises. Also keeps your mic clean and helps extend its lifetime. This windscreen will fit most standard mics.

Click here to learn more about Musician’s Gear Microphone Windscreen Blue Foam

Samson’s R-21s are high-quality, low-impedance vocal/instrument mics with a warm, natural sound, a tight cardioid pattern for maximum gain before feedback, a dual stage heavy-duty windscreen, a die-cast mic body, and gold-plated XLR pins for reliable operation. This special package includes mic clips and a rugged foam lined carrying case.

Click here to learn more about Samson R21 Microphone

The Fin Dynamic Mic captures remarkably natural, clear sound and is designed for live sound, recording, and broadcast applications. The exceptional performance is achieved thanks to a special magnet structure with a large 1-1/18" aluminum low mass voice coil assembly similar to the Heil PR 20. The frequency response is 60 Hz – 18 kHz with that traditional Heil Sound mid range "bouquet" at 4 kHz, presenting incredible brilliance and presence. The Heil Fin exhibits a tight linear cardioid pattern. The chrome finish is a special "showchrome," where the steel body is copper-plated and then double chrome-plated, producing a deep chrome finish. A blue molded internal foam windscreen inside the grill covers the large diameter Heil dynamic microphone element mounted in a specially tooled Sorbothane shock mount.The fun part of The Fin is the four L.E.D. lamps mounted inside. These can only be illuminated when using The Fin into one of the 3-pin balanced XLR inputs of a professional mixing console that supplies a +48 volt DC phantom voltage down the balanced mic line. Standard 5/8" 27-thread connection allows The Fin to be mounted on booms or floor stands.The Fin mic from Heil Sound is terrific for vocals, instrument amplifiers, harmonica, and speech, and puts the fun back into the dynamic microphone.

Click here to learn more about Heil Sound The Fin Dynamic Microphone White

The Fin Dynamic Mic captures remarkably natural, clear sound and is designed for live sound, recording, and broadcast applications. The exceptional performance is achieved thanks to a special magnet structure with a large 1-1/18" aluminum low mass voice coil assembly similar to the Heil PR 20. The frequency response is 60 Hz – 18 kHz with that traditional Heil Sound mid range "bouquet" at 4 kHz, presenting incredible brilliance and presence. The Heil Fin exhibits a tight linear cardioid pattern. The chrome finish is a special "showchrome," where the steel body is copper-plated and then double chrome-plated, producing a deep chrome finish. A blue molded internal foam windscreen inside the grill covers the large diameter Heil dynamic microphone element mounted in a specially tooled Sorbothane shock mount.The fun part of The Fin is the four L.E.D. lamps mounted inside. These can only be illuminated when using The Fin into one of the 3-pin balanced XLR inputs of a professional mixing console that supplies a +48 volt DC phantom voltage down the balanced mic line. Standard 5/8" 27-thread connection allows The Fin to be mounted on booms or floor stands.The Fin mic from Heil Sound is terrific for vocals, instrument amplifiers, harmonica, and speech, and puts the fun back into the dynamic microphone.

Click here to learn more about Heil Sound The Fin Dynamic Microphone Blue

The Fin Dynamic Mic captures remarkably natural, clear sound and is designed for live sound, recording, and broadcast applications. The exceptional performance is achieved thanks to a special magnet structure with a large 1-1/18" aluminum low mass voice coil assembly similar to the Heil PR 20. The frequency response is 60 Hz – 18 kHz with that traditional Heil Sound mid range "bouquet" at 4 kHz, presenting incredible brilliance and presence. The Heil Fin exhibits a tight linear cardioid pattern. The chrome finish is a special "showchrome," where the steel body is copper-plated and then double chrome-plated, producing a deep chrome finish. A blue molded internal foam windscreen inside the grill covers the large diameter Heil dynamic microphone element mounted in a specially tooled Sorbothane shock mount.The fun part of The Fin is the four L.E.D. lamps mounted inside. These can only be illuminated when using The Fin into one of the 3-pin balanced XLR inputs of a professional mixing console that supplies a +48 volt DC phantom voltage down the balanced mic line. Standard 5/8" 27-thread connection allows The Fin to be mounted on booms or floor stands.The Fin mic from Heil Sound is terrific for vocals, instrument amplifiers, harmonica, and speech, and puts the fun back into the dynamic microphone.

Click here to learn more about Heil Sound The Fin Dynamic Microphone Red