Home Recording Studio Center

The piñata is a classic image of festive party fun, making this cheery magnet a day-brightener in any kitchen. A must-have for any fan of the classic latin american loteria game! weight 0.1 lb. Porcelain and magnet. 2 1/4 x 1/4 x 2 1/4 high…….

Click here to learn more about Tripp Lite PS4816 16-Outlet Power Strip (15-Amp, 15-Foot Cord)

Designed for Panasonic digital phonesystems….

Click here to learn more about Ultralinx 66 Block 235 Volt Clamping Solid State 2 Led 350ma Sneak Current Fuse by ITW Linx

12V DC, 120V AC – 120V AC – Continuous Power:750W…

Click here to learn more about Tripp Lite APS750 750W 12V DC to AC Inverter with Automatic Line-to-Battery 20-Amp Charger

…

Click here to learn more about Handy Solutions Crest Toothpaste, Regular, 1 ea (.85 oz.) Packages (Pack of 12)

LOW PROFILE AV COMPONENT COOLER FOR MEDIA PC HOME THEATER PRODUCTS…

Click here to learn more about Antec Low Profile AV Component Cooler for Media PC Home Theater Products

This rack-mountable, 5-channel power amplifier has 600 watts of power. On the back, it’s equipped with four (4) mic inputs, each of which can take balanced XLR or 1/4-inch jack inputs and a rotary-controlled filter that prevents excessive feedback.

Click here to learn more about 19-inch Rack Mount 600 Watt Power Amplifier (Refurbished)

19” Rack Mount 3200 Watt Power Amplifier

Click here to learn more about PylePro 19-inch Rack Mount 3200 Watt Power Amplifier

Crank up the sound with this 19-inch rack mount 3000-Watt power amplifier Amp features dual Blue LED displayStereo audio accessory has dual output level controls

Click here to learn more about PylePro 19-inch Rack Mount 3000-watt Power Amplifier

Crank up the sound on this 19-inch rack mount 2000-Watt power amplifierStereo audio component features illuminated dual VU output level metersAmp has meter range selector

Click here to learn more about PylePro 19-inch Rack Mount 2000 Watt Power Amplifier (Refurbished)

This two-channel rack-mountable amp has 4000 watts of power. Each input takes RCA, XLR, or 1/4-inch phono for use in stereo, mono, or bridge mode for maximum output. A clipping LED reminds you to turn it down if your signal is distorted.

Click here to learn more about PylePro 3000 Watts Amplifier with Crossover (Refurbished)

Crank up the sound on this 19-inch rack 4500 watt power amplifierCar stereo amp has dual output level controls and illuminationA/V device has protection indicator

Click here to learn more about PylePro 19-inch Rack 4500 Watt Power Amplifier

Crank up the sound on this 19-inch rack 3000 watt power amplifierCar stereo amp has dual output level controls and illuminationA/V device has protection indicator

Click here to learn more about PylePro 19-inch Rack 3000-Watt Power Amplifier

This professional, high-power multi-purpose 8-channel headphone amp features 8 totally independent stereo high-power amplifier sections in one rack space, 2 separate main inputs, 2 headphone outputs per channel and even a dedicated direct input for each channel.

Click here to learn more about Behringer Powerplay Pro-8 HA8000 8-Channel Headphone Amplifier

The compact PLX1104 power amplifier brings the same performance and technology as the rest of QSC’s PLX2 Series to applications that don’t require bridged or two-ohm operation. Designed to power one or two speakers from each amplifier channel (4-ohm minimum loading), the PLX1104 offers a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds, the plug-and-play PLX1104 is perfect for ultra-portable rigs, as well as reference-quality playback.The PLX1104 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC’s years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight TechnologyPowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier’s output section. The power supply doesn’t sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio QualityPLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven.550W/ch @ 4 ohms, 325W/ch @ 8 ohms.550W/ch @ 4 ohms, 325W/ch @ 8 ohmsVery lightweight (13 lbs.)Cooling design exhausts hot air out the front, keeping the rack coolFlow-through heatsinks require no filters that could become cloggedFront panel LED power, clip, -10 dB, and signal present indicators for systemmonitoring and troubleshootingSpeakon NL-4 output connectors provide a positive-locking speaker connectionCh 1 output uses all 4 wires for single-cable connection to bi-amplified speakers21-position front-panel gain controls for precise, repeatable amplifier adjustmentBalanced XLR inputs with parallel TRS connectors accommodate all commoninput connectors and support loop-through operationClip limiting protects speakers; thermal limiting maintains operation even duringabnormal overloads

Click here to learn more about Qsc Plx1104 Professional Power Amplifier

When you choose Crowns XTi 2 Series, youre choosing one of the most powerful and innovative amplifiers on the market today. With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility. You also have greatly improved control capabilities. The addition of Peak x Plus Limiters gives you full command over threshold, attack and release, and we enhanced the Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing for application-specific tuning. Plus, youll now be able to tailor fan speed for specific applications and have software visibility of the Power Supply Temperature and AC Line Voltage. Combine all of that with integrated cast-aluminum rack handles for maximum durability and portability and you have the power to move you and the world. Peak x Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls normal, early and full speed for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet Band Manager and System Architect control software Increased number of presets to a total of 30; 29 of which are user definable

Click here to learn more about Crown Xti2002 Power Amplifier

The PLX1802 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX1802 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC’s years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight Technology PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier’s output section. The power supply doesn’t sag so bass notes stay full and powerful while the high end remains crisp and clean. Audio Quality PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. Stereo: 900W/ch @ 2 ohms, 575W/ch @ 4 ohms, 330W/ch @ 8 ohms Bridged mono mode: 1800W @ 4 ohms, 1200W @ 8 ohmsStereo: 900W/ch @ 2 ohms, 575W/ch @ 4 ohms, 330W/ch @ 8 ohms Bridged mono mode: 1800W @ 4 ohms, 1200W @ 8 ohms Very lightweight (21 lbs.) Advanced cooling design with front exhaust Power, clip, -10dB, and signal present LEDs Front-panel gain controls Balanced XLR inputs with TRS connectors PowerLight power supply Clip limiting Thermal limiting Speakon NL4 and binding post outputs 100Hz high-pass and low-pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover Switchable/defeatable 33Hz infrasonic filters protect woofers from over-excursion damage Switchable/defeatable clip limiters

Click here to learn more about Qsc Plx1802 Professional Power Amplifier

The PLX3602 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX3602 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC’s years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight TechnologyPowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier’s output section. The power supply doesn’t sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio QualityPLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven.Stereo: 1800W/ch @ 2 ohms, 1250W/ch @ 4 ohms, 775W/ch @ 8 ohmsBridged mono mode: 3600W @ 4 ohms, 2600W @ 8 ohmsVery lightweight (21 lbs.)Advanced cooling design with front exhaustPower, clip, -10dB, and signal present LEDsFront-panel gain controlsBalanced XLR inputs with TRS connectorsPowerLight power supplyClip limitingThermal limitingSpeakon NL4 and binding post outputs100Hz high-pass and low-pass filters for bi-amping subwoofer and satellite systems without the need for an external crossoverSwitchable/defeatable 33Hz infrasonic filters protect woofers from over-excursion damageSwitchable/defeatable clip limiters

Click here to learn more about Qsc Plx3602 Professional Power Amplifier

The PLX2502 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX2502 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC’s years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight TechnologyPowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier’s output section. The power supply doesn’t sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio QualityPLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven.Stereo: 1250W/ch @ 2 ohms, 750W/ch @ 4 ohms, 450W/ch @ 8 ohmsBridged mono mode: 2500W @ 4 ohms, 1500W @ 8 ohmsStereo: 1250W/ch @ 2 ohms, 750W/ch @ 4 ohms, 450W/ch @ 8 ohmsBridged mono mode: 2500W @ 4 ohms, 1500W @ 8 ohmsVery lightweight (21 lbs.)Advanced cooling design with front exhaustPower, clip, -10dB, and signal present LEDsFront-panel gain controlsBalanced XLR inputs with TRS connectorsPowerLight power supplyClip limitingThermal limitingSpeakon NL4 and binding post outputs100Hz high-pass and low-pass filters for bi-amping subwoofer and satellite systems without the need for an external crossoverSwitchable/defeatable 33Hz infrasonic filters protect woofers from over-excursion damageSwitchable/defeatable clip limiters

Click here to learn more about Qsc Plx2502 Professional Power Amplifier

The PLX3102 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX3102 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC’s years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight TechnologyPowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier’s output section. The power supply doesn’t sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio QualityPLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven.Stereo: 1550W/ch @ 2 ohms, 1000W/ch @ 4 ohms, 600W/ch @ 8 ohmsBridged mono mode: 3100W @ 4 ohms, 2100W @ 8 ohmsStereo: 1550W/ch @ 2 ohms, 1000W/ch @ 4 ohms, 600W/ch @ 8 ohmsBridged mono mode: 3100W @ 4 ohms, 2100W @ 8 ohmsVery lightweight (21 lbs.)Advanced cooling design with front exhaustPower, clip, -10dB, and signal present LEDsFront-panel gain controlsBalanced XLR inputs with TRS connectorsPowerLight power supplyClip limitingThermal limitingSpeakon NL4 and binding post outputs100Hz high-pass and low-pass filters for bi-amping subwoofer and satellite systems without the need for an external crossoverSwitchable/defeatable 33Hz infrasonic filters protect woofers from over-excursion damageSwitchable/defeatable clip limiters

Click here to learn more about Qsc Plx3102 Professional Power Amplifier

Crank up the sound with this 19-inch rack mount 3000-Watt power amplifier Amp features dual Blue LED displayStereo audio accessory has dual output level controlsSignal indicatorProtection and clip indicatorIllumination power on/offChrome face plateStereo or bridged power into 4 or 8 OhmsDual RCA and XLR+1/4-inch combo inputsGround lift switchCircuit breakerHeavy duty fan cooled aluminum heatsinkDimensions: 19 inches wide x 5.2 inches high x 15.4 inches deep

Click here to learn more about PylePro 19-inch Rack Mount 3000-watt Power Amplifier

Crank up the sound on this 19-inch rack 3000 watt power amplifierCar stereo amp has dual output level controls and illuminationA/V device has protection indicator Power on/off switch Stereo/mono selector Stereo or bridged power into 4 or 8 Ohms Dual RCA and combo inputs Blue color LED display Ground lift switch AC accessory inlet Heavy duty fan cooled aluminum heatsink 110/220 voltage selector Dimensions: 3 15/32 inches high x 19 inches wide x 10 11/16 inches deep Weight 18.52 lbs.

Click here to learn more about PylePro 19-inch Rack 3000-Watt Power Amplifier

Crank up the sound on this 19-inch rack 4500 watt power amplifierCar stereo amp has dual output level controls and illuminationA/V device has protection indicator Power on/off switch Stereo/mono selector Stereo or bridged power into 4 or 8 Ohms Dual RCA and combo inputs Blue color LED display Ground lift switch AC accessory inlet Heavy duty fan cooled aluminum heatsink 110/220 voltage selector Dimensions: 3 15/32 inches high x 19 inches wide x 10 11/16 inches deep Weight 20.28 lbs.

Click here to learn more about PylePro 19-inch Rack 4500 Watt Power Amplifier