Space Amp Rack
May 13th, 2010Remodeling A Kitchen Can Be Fun or A Disaster
A kitchen remodeling job can be thoroughly entertaining or a just one problem after the next; I once heard that lots of people end up getting divorced while they’re in the middle of a kitchen remodeling project! Existing without a kitchen handy can be more than a hassle, it can be aggravating too.
So whether you are a man or a woman, single or married, here are some important planning tips about kitchen islands to avoid the headaches and minimize your kitchen downtime.
The Kitchen Triangle – No this is not like the Bermuda triangle, though plenty of stuff seems to disappear in my kitchen! The most efficient design for most kitchens is when the locations of the stove, refrigerator, and sink/dishwasher form a triangle. Think about this when planning to build a kitchen island. What is the purpose of the island?
An island can:
* provide more workspace
* house appliances
* add storage
* provide seating and eating space
The Kitchen Island – If you are adding an island, there are some measurements to keep in mind. There needs to be a minimum of 36″ for walking between counters, appliances, cabinets and islands. Also ensure that every one of the appliance and cabinet doors has ample room to open and close completely. The height of the island should be the same as your counter height. Many are square or rectangular, though the shape of your island is only limited by the space and your imagination.
Islands are usually designed with the same finishing materials as the kitchen cabinets in order to blend in perfectly. However they can be metal, wood, or stone. Some islands wrap the surface material down one or more of the sides.
Islands often need electricity. You do not want electrical cords crossing walkways. Electrical outlets can be installed high on the sides of the island and preferably away from any seating areas around the island. Check local codes. Most advise 20 amp 120-volt circuits and GFCI (Ground Fault Circuit Interrupter) receptacles.
Appliances on the Island – Islands can incorporate appliances, stove tops, and even sinks.
Above Your Island – The lighting above your island should be considered as well as other options. In many installations, cabinets, pots and pan hangers, and vent hoods or exhaust chutes can be installed above the island, depending on the application.
There are all sorts of different racks available for hanging pots and pans above your island. They come in many shapes and sizes and finishes. Be sure to measure for clearance if people will be seated anywhere around the island.
Island Tops – Counter top planning requires some answers to a few questions:
* How much cooking and baking will be done?
* What is the counter top budget?
* What material do you prefer?
Think about heat resistant counter top materials such as stone, granite, tile, or metal that blends with the other counter tops in the area. Nowadays people do mix and match surfaces depending on use.
Make sure edges and corners are smooth and rounded for safety. Formica and laminates were the most common counter top materials for a long time. Now lower costs and technology are replacing laminates with natural stone and newer fabricated surfaces. Some counter top materials include butcher block, ceramic, concrete, copper, granite, laminate, limestone, marble, quartz, slate, soapstone, stainless steel, stone, tile, and wood.
Under Your Island – Under island cabinets and drawers are common and useful storage. If your island holds the primary sink you’ll likely want to put in a dishwasher as well. An island can often be a useful location to have a trash bin installed as people may be eating around the area regularly.
No Island is an Island – Even your island is subject to local building codes. You will want to run your plans by a local contractor and/or your zoning code engineer to make sure your island is meeting all building codes.
About the Author
I found it extremely simple to locate local businesses that performed kitchen remodeling at Home Services Engine. It’s a well laid out site that’s easy to navigate, making it easy to find great local businesses. If you’re searching for a top notch local kitchen remodeling service, go to=> http://www.homeservicesengine.com/Kitchen_Remodeling_Planning/
2xSoundstream T5-12 900w rms each playing Nelly Country Grammar
Breville BOV800XL The Smart Oven 1800-Watt Convection Toaster Oven with Element IQ $245.98
The selectable convection heat helps make this oven smarter than ever%2E One major problem when roasting or baking in a compact electric oven is evenly distributing heat where needed for consistent food coverage%2E…
Click here to learn more about Breville BOV800XL The Smart Oven 1800-Watt Convection Toaster Oven with Element IQ
LG LMV1680ST 1.6 cu. ft. Over-the-Range Microwave Oven with 300 CFM Ventilation System, 1000 Cooking Watts, 10 Power Levels, Auto/Rapid Defrost and Auto Reheat: Stainless Steel $248.00
Behind the stylish%2C stainless steel exterior of this microwave oven lies a high%2Dperformance cooking machine%2E LG%22s powerful vented airflow system makes microwave cooking more pleasant by reducing food odors%2E…
Click here to learn more about LG LMV1680ST 1.6 cu. ft. Over-the-Range Microwave Oven with 300 CFM Ventilation System, 1000 Cooking Watts, 10 Power Levels, Auto/Rapid Defrost and Auto Reheat: Stainless Steel
Farm Innovators Thermo Cube Thermostatically Controlled Outlet $17.99
The Thermo Cube is a unique, patented electrical device that plugs into a standard 15 amp electrical outlet and turns power on automatically according to outside air temperature, saving money by using power only when temperatures require heating or cooling. There are five models available with different temperature ranges to choose from. Each unit has two receptacles for use with more than one ele…
Click here to learn more about Farm Innovators Thermo Cube Thermostatically Controlled Outlet
Tripp Lite ISOBAR12/20UL Isobar Ultra Surge Protector/Suppressor 20-Amp 12 outlets 15ft Cord 1280 Joules $89.95
Tripp Lite’s Isobar 12/20 Ultra Rackmount Surge Suppressor has 8 outlets (2-15 amp & 6-20 amp), a 12-ft. cord, diagnostic LEDs, and 1,200 joules of energy absorption. $25,000 Ultimate Lifetime Insurance. No warranty cards required for coverage!…
Click here to learn more about Tripp Lite ISOBAR12/20UL Isobar Ultra Surge Protector/Suppressor 20-Amp 12 outlets 15ft Cord 1280 Joules
Got Echo? Women’s Babydoll Petite Fit Tee Shirt in 6 Colors Small thru XL
Petite form-fitting babydoll style. Please refer to our sizing chart for measurements. This design also available as a regular fit women’s shirt in our other amazon.com listings….
Click here to learn more about Got Echo? Women’s Babydoll Petite Fit Tee Shirt in 6 Colors Small thru XL
Odyssey Black Label Amp Rack 4 Space Rack $169.99
These new sturdy Black Label ATA Amp Racks incorporate dual rack rails (front and rear), heavy-duty rubber feet (non-wheeled versions), spring-loaded handles, and removable front and rear covers. Designed to protect and transport larger amps and other standard 19″ rack mount gear.
Click here to learn more about Odyssey Black Label Amp Rack 4 Space Rack
Odyssey Black Label Amp Rack 8 Space Rack $219.99
These new sturdy Black Label ATA Amp Racks incorporate dual rack rails (front and rear), heavy-duty rubber feet (non-wheeled versions), spring-loaded handles, and removable front and rear covers. Designed to protect and transport larger amps and other standard 19″ rack mount gear.
Click here to learn more about Odyssey Black Label Amp Rack 8 Space Rack
Odyssey Black Label Amp Rack 6 Space Rack $181.99
These new sturdy Black Label ATA Amp Racks incorporate dual rack rails (front and rear), heavy-duty rubber feet (non-wheeled versions), spring-loaded handles, and removable front and rear covers. Designed to protect and transport larger amps and other standard 19″ rack mount gear.
Click here to learn more about Odyssey Black Label Amp Rack 6 Space Rack
Used Odyssey Black Label Amp Rack 6 Space Rack $181.99
These new sturdy Black Label ATA Amp Racks incorporate dual rack rails (front and rear), heavy-duty rubber feet (non-wheeled versions), spring-loaded handles, and removable front and rear covers. Designed to protect and transport larger amps and other standard 19″ rack mount gear.Heavy-duty ball corners Front and rear rack rails Anodized and powder coated hardware Recessed hardware and latches Limited lifetime warranty
Click here to learn more about Used Odyssey Black Label Amp Rack 6 Space Rack
Raxxess Carpeted Converta Rack 10X10 Space $289.99
A compact rack case solution that will hold your rackmount mixer, signal processor, and power amp in one convenient unit. The Converta Rack sets up and packs up fast, is internally braced, and has a rugged carpeted exterior that will shrug off rough handling. Made in the USA.
Click here to learn more about Raxxess Carpeted Converta Rack 10X10 Space
RaXXess Universal Shelf (1 Space) $18.95
This is Raxxess’s one space, 14-gauge steel rack shelf.
Click here to learn more about RaXXess Universal Shelf (1 Space)
SKB 2-Space X-Rack Effect/Amp Rack (10.5-inch Deep) $89.99
New 10-1/2 in. depth X-Racks accommodate smaller rackmountable equipment such as guitar effects and shallow depth studio effects. Why mount that stuff in larger racks when you don’t need all of that extra depth and weight? With an X-Rack, you need not unplug these components to close the back panel. The X-Rack features a molded-in carry handle. Best of all, you can stack it right on top of your amp.
Click here to learn more about SKB 2-Space X-Rack Effect/Amp Rack (10.5-inch Deep)
SKB 3-Space X-Rack Effect/Amp Rack (10.5-inch Deep) $99.99
New 10-1/2 in. depth X-Racks accommodate smaller, rackmountable equipment such as guitar effects and shallow-depth studio effects. Why mount that stuff in larger racks when you don’t need all of that extra depth and weight? With an X-Rack, you need not unplug these components to close the back panel. The X-Rack features a molded-in carry handle. Best of all, you can stack it right on top of your amp.
Click here to learn more about SKB 3-Space X-Rack Effect/Amp Rack (10.5-inch Deep)
SKB 4-Space X-Rack Effect/Amp Rack (10.5-inch Deep) $114.99
New 10-1/2 in. depth X-Racks accommodate smaller rackmountable equipment such as guitar effects and shallow depth studio effects. Why mount that stuff in larger racks when you don’t need all of that extra depth and weight? With an X-Rack, you need not unplug these components to close the back panel. The X-Rack features a molded-in carry handle. Best of all, you can stack it right on top of your amp.
Click here to learn more about SKB 4-Space X-Rack Effect/Amp Rack (10.5-inch Deep)
Studio Projects Rack Kit for VTB1 $19.95
The new VTB1 Rack Kits hold up to 2 VTB1′s in a single rack space.
Click here to learn more about Studio Projects Rack Kit for VTB1
RaXXess Accessory Riser for Amp Handle or Microphone Stand $12.95
The AR-5 is a handy little device that mounts under an amplifier handle or on a mic stand. It can act as a third hand or save valuable rack space. Perfect for tuners or other small devices.
Click here to learn more about RaXXess Accessory Riser for Amp Handle or Microphone Stand
SKB Roto Rack Case $209.95
The SKB Roto Rack Case is a 10U slanted top and 6U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the new AV-8 with the lid closed!
Click here to learn more about SKB Roto Rack Case
SKB REX6 Expander Rack Case For Mighty GigRig $274.99
The SKB REX6 Expander Rack adds rack space to the SKB R1406 Mighty GigRig. The roto molded 6U Expander Rack case features a 6U extended depth rack that can be locked securely to the bottom of the Mighty GigRig for a total of 12U of rack space on the front of the combined units. As with the Mighty GigRig, the REX6 Expander accepts 6U rear rack rails for additional rack space.
Click here to learn more about SKB REX6 Expander Rack Case For Mighty GigRig
Eventide Space Reverb Pedal $499
Eventide’s Space features 12 of Eventide’s signature reverb combination effects taken from the H8000FW and Eclipse V4 along with some startling new magic. These unique effects, previously available only in Eventide rack processors, are now available in a compact, roadworthy package. Never before has there been a more dazzling collection of reverb algorithms combined with delays, pitch shifting, tremolo, modulation, and special effects in such a compact and affordable package.
Click here to learn more about Eventide Space Reverb Pedal
Middle Atlantic 2 Space (3 1/2 in.) Rack Drawer, Black Brushed Finish $129.95
This 3-1/2 in. (2 rack space) heavy-duty drawer has a faceplate with a black anodized finish. Fully enclosed with inside dimensions measuring 15-7/8 in. wide by 14-1/2 in. deep, the D and TD Series drawers feature spring-loaded latches and rugged, straightforward construction.
Click here to learn more about Middle Atlantic 2 Space (3 1/2 in.) Rack Drawer, Black Brushed Finish
Posted in Rack Gear | 
Tags: 16 space amp rack, 2009, 4 space amp rack, 6 space amp rack, 8 space amp rack, amp rack, rackcases, racks, space amp rack