Posts Tagged ‘networking’
Xlr Connectors Rack
January 5th, 2010The imperative studio-monitoring interface for the contemporary digital studio! The Presonus Central Station is the ultimate studio-monitoring interface for the modern digital studio. The Presonus Central Station features three sets of stereo analog inputs to toggle between input sources like: DAW, mixer, CD/DAT/Tape player, or Keyboards/samplers. Two stereo analog inputs feature TRS balanced and the 3rd stereo input features RCA inputs with trim control for level matching of input signals. Additionally, the Central Station will contain 2 digital inputs via S/PDIF or TOSLINK providing D/A conversion up to 24Bit /192kHz.
This permits you to observe DAW and CD/DAT outputs through the same professional quality converter for the most accurate A/B relationship and maximum quality-monitoring atmosphere. The digital to analog converter suggest the utmost probable audio excellence with over 117dB dynamic range and ultra high quality analog circuitry. The Presonus Central Station features 3 sets of monitor outputs, each with their own set of passive trim controls. The monitoring section also provides Mute, Dim and Mono switches. Also the Presonus Central Station includes a set of CUE outputs that can feed headphone amplifiers and a separate stereo Main line level output.
The Presonus Central Station has an onboard Talkback microphone, which is routed through the Cue outputs for communication between artist and engineer. The Presonus Central Station also includes a Microphone XLR input on the rear panel for use with an external microphone. When Talkback is used the Cue mix is automatically “dimmed” for added ease of communication.The Presonus Central Station features a purely passive signal path for ultimate sonic performance. The main audio path of the Presonus Central Station uses no amplifier stages including op amps or active IC’s that includes noise, color, distortion, and produce that “pinched” sound. Distortion created by op amps and IC’s also gives extra ear weariness.
The Presonus Central Station Remote Control (CSR-1) can be connected to the rear of the Presonus Central Station via DB9 connector to control Volume, Talkback, and Mute, input source switching and speaker output switching functions. Keep the Presonus Central Station in your rack with your gear and use the CSR-1 for ultimate control and flexibility.Signal routing in the Presonus Central Station is accomplished by utilizing 34 sealed mechanical relays (instead of active IC’s) maintaining a minimal signal path design wherein extraneous electronics are hard-wire bypassed. Using relays is to make sure the most transparent signal path increases dynamic range, frequency range, and headroom, while decreasing noise and coloration. The Presonus Central Station uses the highest quality passive components including military grade 1% tolerance metal film resistors, multi-element potentiometers and ultra-durable connectors to deliver the highest sonic performance.
Features
Presonus Central Station includes the features like Passive Audio Path – no op amps or IC’s in main audio path, 5 stereo inputs with 2 digital and 3 analog, 24-Bit/192kHz DAC (>117dB dynamic range) via SPDIF and TOSLINK , 3 sets of monitor outputs each with passive volume control and Talkback microphone with volume to feed headphone and cue output . Addition to that it includes some other features such as Accurate dual 30-segment LED for metering, 2 front panel headphone jacks with separate volume control MAIN and CUE stereo output have independent input source, Optional console remote control with input, output, talkback, and volume.
About the Author:
Usha Rani is a Copywriter of
www.gigasonic.com.
She written many articles in various topics.For more information visit:
www.gigasonic.com.
contact her at usharani.articles@gmail.com
Article Source: ArticlesBase.com – Presonus Central Station
Rave in a Bedroom vs. jayt303′s set “91 House” (1 of 4)
Datavideo ITC-100 8-User Base Station Intercom $1,056.00
One of the innovative features of the rack-mountable ITC-100 intercom from DataVideo is that it can use headsets ranging from low-cost cell phone headsets to high-quality professional units. Up to 8 users are connected to the ITC-100 via PTT wired beltpacks. Cables for connecting the beltpacks may be up to 300 meters long, and use 5-Pin XLR connectors. The base station features all call and mute b…
Click here to learn more about Datavideo ITC-100 8-User Base Station Intercom
Leviton N1616-D00 16 Channel Programmable Console, 16 Patterns, 16 Flash, NSI Micro-Plex, DMX Installed $529.87
…
Click here to learn more about Leviton N1616-D00 16 Channel Programmable Console, 16 Patterns, 16 Flash, NSI Micro-Plex, DMX Installed
Blue Microphones Icicle XLR to USB Mic Converter/Mic Preamp $48.75
Why should you bother with a bulky interface, when all you want to do is plug a single microphone into your computer? With a Blue Icicle in your arsenal, you can turn any microphone into a totally streamlined, USB-ready recording device. Instead of lugging around some fancy rack and a bunch of outboard gear, just toss an Icicle and a mic in your laptop bag, and take your studio straight to the sou…
Click here to learn more about Blue Microphones Icicle XLR to USB Mic Converter/Mic Preamp
GLS Audio XLR Female Jack 3 Pin – Panel Mount Jacks D Series Size XLR-F – 20 PACK $25.99
We are offering these New Professional Series Female XLR Panel Jacks by GLS Audio. We are selling them at an incredible savings per 20 pack! These are the same high quality jacks that we use on our snakes and patch bays. The GLS Audio XLR jacks are very Heavy Duty and comparable to Switchcraft and Neutrik….
Click here to learn more about GLS Audio XLR Female Jack 3 Pin – Panel Mount Jacks D Series Size XLR-F – 20 PACK
Neutrik NCJ6FI-S Combo XLR/1/4 Stereo Jack Nonswitching $2.49
Neutrik is proud to offer the Combo connector – a combined XLR female 3-pin receptacle and 1/4″ phone jack in one! This unique connector accepts balanced and line inputs or instrument inputs – all in one unit of panel space….
Click here to learn more about Neutrik NCJ6FI-S Combo XLR/1/4 Stereo Jack Nonswitching
Planet Waves Swivel XLR Microphone Cable $33.95
Designed for home recording and pro audio applications, Planet Waves’ Swivel XLR Microphone Cables feature patent-pending XLR swivel connectors that swivel from in-line to a right-angle, both ways, and can be used at any position in between. Now, wiring microphones, consoles, and other rack gear in tight or difficult-to-reach spaces is no trouble at all
Click here to learn more about Planet Waves Swivel XLR Microphone Cable
Point Source Audio CON-XLR Adapter for Wireless Mics with TA4 Connectors $69.95
Point Source Audio’s CON-XLR in-line preamplifier adapter connects microphones with Shure TA-4 connectors and provides an XLR output for applications where direct connections are preferred instead of connecting to a wireless transmitter. Requires phantom power to operate.
Click here to learn more about Point Source Audio CON-XLR Adapter for Wireless Mics with TA4 Connectors
CBI XLR Female Plug $2.95
This high-quality, affordable XLR jack is ideal for replacing old, worn out connectors, or if you’re building new cables.
Click here to learn more about CBI XLR Female Plug
CBI XLR Male Plug $2.95
This high-quality, affordable XLR jack is ideal for replacing old, worn out connectors or if you’re building new cables.
Click here to learn more about CBI XLR Male Plug
CBI XLR Female To XLR Female Coupler $7.95
This coupler features 3-pin female to female connectors.
Click here to learn more about CBI XLR Female To XLR Female Coupler
CBI 32×8 Audio Snake with Neutrik Connectors (XLR x 32, 1/4 TRS x
$1150
CBI 32×8 Audio Snakes feature top quality components and construction including Neutrik hand-soldered 32 XLR and 8 TRS panel mounts in the stage box; CBI XLR nickel connectors on the fan; and 14/16 gauge rolled steel stage box construction. Other features include Belden CBI individually shielded multipair wire with a flexible black PVC jacket. The fanouts provide double layer heat shrink at the connection and junction and the box features a durable hammered enamel finish. 10 year warranty.
Click here to learn more about CBI 32×8 Audio Snake with Neutrik Connectors (XLR x 32, 1/4 TRS x
CBI 24×8 Audio Snake with Neutrik Connectors (XLR x 24, 1/4 TRS x
$899.95
CBI 24×8 Audio Snakes feature top quality components and construction including Neutrik hand-soldered 24 XLR and 8 TRS panel mounts in the stage box; CBI XLR nickel connectors on the fan; and 14/16 gauge rolled steel stage box construction. Other features include Belden CBI individually shielded multipair wire with a flexible black PVC jacket. The fanouts provide double layer heat shrink at the connection and junction and the box features a durable hammered enamel finish. 10 year warranty.
Click here to learn more about CBI 24×8 Audio Snake with Neutrik Connectors (XLR x 24, 1/4 TRS x
CBI XLR Male To XLR Male Coupler $8.95
This coupler can be used to link 2 mic cables together. It features 3-pin male to male connectors.
Click here to learn more about CBI XLR Male To XLR Male Coupler
CBI 16×4 Audio Snake with Neutrik Connectors (XLR x 16, 1/4 TRS x 4) $329.95
CBI Performer Series multichannel system with top-quality components and the finest craftsmanship! Sixteen XLR inputs; 4 TRS 1/4 in. returns.
Click here to learn more about CBI 16×4 Audio Snake with Neutrik Connectors (XLR x 16, 1/4 TRS x 4)
CBI 24×4 Audio Snake with Neutrik Connectors (XLR x 24, 1/4 TRS x 4) $399.95
CBI Performer Series multichannel system with top-quality components and the finest craftsmanship! Twenty-four XLR inputs; 4 TRS 1/4 in. returns.
Click here to learn more about CBI 24×4 Audio Snake with Neutrik Connectors (XLR x 24, 1/4 TRS x 4)
Planet Waves XLR Female XLR Female $9.49
Connects 2 male XLR ends. High-quality gold-plated connectors.
Click here to learn more about Planet Waves XLR Female XLR Female
Planet Waves Xlr Female Xlr Female $10.99
Connects 2 male XLR ends. High-quality gold-plated connectors.
Click here to learn more about Planet Waves Xlr Female Xlr Female
American DJ 3-Pin Male – Female XLR Connectors $6.99
3-pin DMX connectors–one male, one female–with gold pins.
Click here to learn more about American DJ 3-Pin Male – Female XLR Connectors
American DJ 5-Pin Male – Female XLR Connectors $6.99
5-pin DMX connectors–one male, one female–with gold pins.
Click here to learn more about American DJ 5-Pin Male – Female XLR Connectors
American Dj 3-Pin Male – Female Xlr Connectors $6.99
3-pin DMX connectors–one male, one female–with gold pins.
Click here to learn more about American Dj 3-Pin Male – Female Xlr Connectors
American Dj 5-Pin Male – Female Xlr Connectors $6.99
5-pin DMX connectors–one male, one female–with gold pins.
Click here to learn more about American Dj 5-Pin Male – Female Xlr Connectors
CBI XLR Female To 1/4 TRS Male Connector $9.95
This adapter can be used for such purposes as connecting a mic cable to an effects rack or 4-track where a balanced connection is preferred. It features XLR female to 1/4 in. TRS male.
Click here to learn more about CBI XLR Female To 1/4 TRS Male Connector
CBI LowZ Microphone Cable with Neutrik Connectors $12.95
The CBI MLN Performer Series mic cables are extremely flexible and durable cables. They are constructed with Beldens 22-gauge, 2-conductor super low noise, ultra flexible audio cable, then fitted to Neutrik male and female XLR connectors.
Click here to learn more about CBI LowZ Microphone Cable with Neutrik Connectors
BLUE Quad Cable XLR Microphone Cable $29.95
The Blue Quad microphone cable reproduces your sound wih high-fidelity quality. The Quad cable is 20 feet in length and features XLR connectors and quadruple shielding.
Click here to learn more about BLUE Quad Cable XLR Microphone Cable
Monster Cable StudioLink Balanced Interconnect XLR to XLR Cable $24.95
Monster Cable StudioLink Balanced Audio cables are best suited for high performance audio interconnect in a wide variety of home and professional performance and studio applications. High and low frequency multi-gauge wire networks preserve clarity and presence between connected components. Patented Time Correct windings provide precise imaging, tight bass and smooth highs. Available with extra-durable 24k gold Neutrik XLR and TRS connectors.
Click here to learn more about Monster Cable StudioLink Balanced Interconnect XLR to XLR Cable
Posted in Rack Gear | 
Tags: Cables, hardware, network, networking, shopping, xlr connectors, xlr connectors rack | 
No Comments »