Home Recording Studio Center

16 OUTLETS15 AMP 120V AC POWER DISTRIBUTIONNEMA 5-15P INPUT & NEMA 5-15R OUTPUT15-AMP CIRCUIT BREAKERSTURDY ALL-METAL EXTRUDED ALUMINUM HOUSINGLIGHTED POWER SWITCH WITH LOCKING TRANSPARENT COVER TO PREVENT ACCIDENTAL SHUTOFFMOUNTING HARDWARE SUPPORTS HORIZONTAL OR VERTICAL MOUNTING APPLICATIONSINCLUDES INSTRUCTION MANUAL & MOUNTING HARDWARE15-FT AC POWER CORDDIM: 48″L X 1.5″H X 1.5″DWEIGHT: 4.3 LB…

Click here to learn more about Tripp Lite PS4816 16-Outlet Power Strip (15-Amp, 15-Foot Cord)

Harness your vehicle”s battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 3000 watts of 120V AC power to 4 AC outlets from any 12V battery or automotive DC source. Includes a PV remote and 25 feet of cable. Super-compact, lightweight metal case design is among the smallest, most rugged inverters available at this power level….

Click here to learn more about Tripp Lite PV3000HF PV 3000W 12V DC to AC Permanent Mount Inverter

pContinuously supplies up to 2400W of 120V AC power to 2 AC outlets from any 24V battery or automotive DC source. Frequency control locks AC output at 60Hz for operating stability of motor loads. Includes a set of high current DC input terminals for simple, permanent installation. Highly reliable large transformer design specializes in powering motors and other inductive loads with high-current st…

Click here to learn more about Tripp Lite PV2400FC PV 2400W 24V DC to AC Inverter Plus with Charge/Load LED’s

Tripp Lite APS2012 PWRINV APS 2012 2000W 12VDC HWIRE…

Click here to learn more about Tripp Lite APS2012 2000W 12V DC to AC Inverter with Automatic Line-to-Battery 100/25-Amp Charger

…

Click here to learn more about Handy Solutions Crest Toothpaste, Regular, 1 ea (.85 oz.) Packages (Pack of 12)

The compact PLX1104 power amplifier brings the same performance and technology as the rest of QSC’s PLX2 Series to applications that don’t require bridged or two-ohm operation. Designed to power one or two speakers from each amplifier channel (4-ohm minimum loading), the PLX1104 offers a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds, the plug-and-play PLX1104 is perfect for ultra-portable rigs, as well as reference-quality playback.The PLX1104 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC’s years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight TechnologyPowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier’s output section. The power supply doesn’t sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio QualityPLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven.550W/ch @ 4 ohms, 325W/ch @ 8 ohms.550W/ch @ 4 ohms, 325W/ch @ 8 ohmsVery lightweight (13 lbs.)Cooling design exhausts hot air out the front, keeping the rack coolFlow-through heatsinks require no filters that could become cloggedFront panel LED power, clip, -10 dB, and signal present indicators for systemmonitoring and troubleshootingSpeakon NL-4 output connectors provide a positive-locking speaker connectionCh 1 output uses all 4 wires for single-cable connection to bi-amplified speakers21-position front-panel gain controls for precise, repeatable amplifier adjustmentBalanced XLR inputs with parallel TRS connectors accommodate all commoninput connectors and support loop-through operationClip limiting protects speakers; thermal limiting maintains operation even duringabnormal overloads

Click here to learn more about Qsc Plx1104 Professional Power Amplifier

When you choose Crowns XTi 2 Series, youre choosing one of the most powerful and innovative amplifiers on the market today. With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility. You also have greatly improved control capabilities. The addition of Peak x Plus Limiters gives you full command over threshold, attack and release, and we enhanced the Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing for application-specific tuning. Plus, youll now be able to tailor fan speed for specific applications and have software visibility of the Power Supply Temperature and AC Line Voltage. Combine all of that with integrated cast-aluminum rack handles for maximum durability and portability and you have the power to move you and the world. Peak x Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls normal, early and full speed for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet Band Manager and System Architect control software Increased number of presets to a total of 30; 29 of which are user definable

Click here to learn more about Crown Xti2002 Power Amplifier

Crank up the sound on this 19-inch rack 3000 watt power amplifierCar stereo amp has dual output level controls and illuminationA/V device has protection indicator Power on/off switch Stereo/mono selector Stereo or bridged power into 4 or 8 Ohms Dual RCA and combo inputs Blue color LED display Ground lift switch AC accessory inlet Heavy duty fan cooled aluminum heatsink 110/220 voltage selector Dimensions: 3 15/32 inches high x 19 inches wide x 10 11/16 inches deep Weight 18.52 lbs.

Click here to learn more about PylePro 19-inch Rack 3000-Watt Power Amplifier

The PLX1802 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX1802 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC’s years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight Technology PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier’s output section. The power supply doesn’t sag so bass notes stay full and powerful while the high end remains crisp and clean. Audio Quality PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. Stereo: 900W/ch @ 2 ohms, 575W/ch @ 4 ohms, 330W/ch @ 8 ohms Bridged mono mode: 1800W @ 4 ohms, 1200W @ 8 ohmsStereo: 900W/ch @ 2 ohms, 575W/ch @ 4 ohms, 330W/ch @ 8 ohms Bridged mono mode: 1800W @ 4 ohms, 1200W @ 8 ohms Very lightweight (21 lbs.) Advanced cooling design with front exhaust Power, clip, -10dB, and signal present LEDs Front-panel gain controls Balanced XLR inputs with TRS connectors PowerLight power supply Clip limiting Thermal limiting Speakon NL4 and binding post outputs 100Hz high-pass and low-pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover Switchable/defeatable 33Hz infrasonic filters protect woofers from over-excursion damage Switchable/defeatable clip limiters

Click here to learn more about Qsc Plx1802 Professional Power Amplifier

The PLX2502 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX2502 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC’s years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight TechnologyPowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier’s output section. The power supply doesn’t sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio QualityPLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven.Stereo: 1250W/ch @ 2 ohms, 750W/ch @ 4 ohms, 450W/ch @ 8 ohmsBridged mono mode: 2500W @ 4 ohms, 1500W @ 8 ohmsStereo: 1250W/ch @ 2 ohms, 750W/ch @ 4 ohms, 450W/ch @ 8 ohmsBridged mono mode: 2500W @ 4 ohms, 1500W @ 8 ohmsVery lightweight (21 lbs.)Advanced cooling design with front exhaustPower, clip, -10dB, and signal present LEDsFront-panel gain controlsBalanced XLR inputs with TRS connectorsPowerLight power supplyClip limitingThermal limitingSpeakon NL4 and binding post outputs100Hz high-pass and low-pass filters for bi-amping subwoofer and satellite systems without the need for an external crossoverSwitchable/defeatable 33Hz infrasonic filters protect woofers from over-excursion damageSwitchable/defeatable clip limiters

Click here to learn more about Qsc Plx2502 Professional Power Amplifier

The PLX3102 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX3102 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC’s years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight TechnologyPowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier’s output section. The power supply doesn’t sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio QualityPLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven.Stereo: 1550W/ch @ 2 ohms, 1000W/ch @ 4 ohms, 600W/ch @ 8 ohmsBridged mono mode: 3100W @ 4 ohms, 2100W @ 8 ohmsStereo: 1550W/ch @ 2 ohms, 1000W/ch @ 4 ohms, 600W/ch @ 8 ohmsBridged mono mode: 3100W @ 4 ohms, 2100W @ 8 ohmsVery lightweight (21 lbs.)Advanced cooling design with front exhaustPower, clip, -10dB, and signal present LEDsFront-panel gain controlsBalanced XLR inputs with TRS connectorsPowerLight power supplyClip limitingThermal limitingSpeakon NL4 and binding post outputs100Hz high-pass and low-pass filters for bi-amping subwoofer and satellite systems without the need for an external crossoverSwitchable/defeatable 33Hz infrasonic filters protect woofers from over-excursion damageSwitchable/defeatable clip limiters

Click here to learn more about Qsc Plx3102 Professional Power Amplifier

The PLX3602 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX3602 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC’s years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight TechnologyPowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier’s output section. The power supply doesn’t sag so bass notes stay full and powerful while the high end remains crisp and clean.Audio QualityPLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven.Stereo: 1800W/ch @ 2 ohms, 1250W/ch @ 4 ohms, 775W/ch @ 8 ohmsBridged mono mode: 3600W @ 4 ohms, 2600W @ 8 ohmsVery lightweight (21 lbs.)Advanced cooling design with front exhaustPower, clip, -10dB, and signal present LEDsFront-panel gain controlsBalanced XLR inputs with TRS connectorsPowerLight power supplyClip limitingThermal limitingSpeakon NL4 and binding post outputs100Hz high-pass and low-pass filters for bi-amping subwoofer and satellite systems without the need for an external crossoverSwitchable/defeatable 33Hz infrasonic filters protect woofers from over-excursion damageSwitchable/defeatable clip limiters

Click here to learn more about Qsc Plx3602 Professional Power Amplifier

When you choose Crown’s XTi 2 Series, you’re choosing one of the most powerful and innovative amplifiers on the market today. With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility. You also have greatly improved control capabilities. The addition of Peak x Plus Limiters gives you full command over threshold, attack and release, and we enhanced the Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing for application-specific tuning. Plus, you’ll now be able to tailor fan speed for specific applications and have software visibility of the Power Supply Temperature and AC Line Voltage. Combine all of that with integrated cast-aluminum rack handles for maximum durability and portability and you have the power to move you and the world. Peak x Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls normal, early and full speed for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet Band Manager and System Architect control software Increased number of presets to a total of 30; 29 of which are user definable

Click here to learn more about Crown Xti 4002 Power Amplifier

When you choose Crown’s XTi 2 Series, you’re choosing one of the most powerful and innovative amplifiers on the market today. With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility. You also have greatly improved control capabilities. The addition of Peak x Plus Limiters give you full command over threshold, attack, and release, and Crown enhanced the Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing for application-specific tuning. Plus, you’ll now be able to tailor fan speed for specific applications and have software visibility of the Power Supply Temperature and AC Line Voltage. Combine all of that with integrated cast-aluminum rack handles for maximum durability and portability and you have the power to move you and the world. Peak x Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls normal, early and full speed for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet Band Manager and System Architect control software Increased number of presets to a total of 30; 29 of which are user definable

Click here to learn more about Crown Xti 1002 Power Amplifier

When you choose Crowns XTi 2 Series, youre choosing one of the most powerful and innovative amplifiers on the market today. With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility. You also have greatly improved control capabilities. The addition of Peak x Plus Limiters gives you full command over threshold, attack and release, and we enhanced the Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing for application-specific tuning. Plus, youll now be able to tailor fan speed for specific applications and have software visibility of the Power Supply Temperature and AC Line Voltage. Combine all of that with integrated cast-aluminum rack handles for maximum durability and portability and you have the power to move you and the world. Peak x Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls normal, early and full speed for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet Band Manager and System Architect control software Increased number of presets to a total of 30; 29 of which are user definable

Click here to learn more about Used Crown Xti2002 Power Amplifier

When you choose Crown’s XTi 2 Series, you’re choosing one of the most powerful and innovative amplifiers on the market today. With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility. You also have greatly improved control capabilities. The addition of Peak x Plus Limiters gives you full command over threshold, attack and release, and we enhanced the Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing for application-specific tuning. Plus, you’ll now be able to tailor fan speed for specific applications and have software visibility of the Power Supply Temperature and AC Line Voltage. Combine all of that with integrated cast-aluminum rack handles for maximum durability and portability and you have the power to move you and the world. Peak x Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls normal, early and full speed for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet Band Manager and System Architect control software Increased number of presets to a total of 30; 29 of which are user definable

Click here to learn more about Crown Xti 6002 Power Amplifier

The PLX1802 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX1802 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC’s years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight Technology PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier’s output section. The power supply doesn’t sag so bass notes stay full and powerful while the high end remains crisp and clean. Audio Quality PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. Stereo: 900W/ch @ 2 ohms, 575W/ch @ 4 ohms, 330W/ch @ 8 ohms Bridged mono mode: 1800W @ 4 ohms, 1200W @ 8 ohmsStereo: 900W/ch @ 2 ohms, 575W/ch @ 4 ohms, 330W/ch @ 8 ohms Bridged mono mode: 1800W @ 4 ohms, 1200W @ 8 ohms Very lightweight (21 lbs.) Advanced cooling design with front exhaust Power, clip, -10dB, and signal present LEDs Front-panel gain controls Balanced XLR inputs with TRS connectors PowerLight power supply Clip limiting Thermal limiting Speakon NL4 and binding post outputs 100Hz high-pass and low-pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover Switchable/defeatable 33Hz infrasonic filters protect woofers from over-excursion damage Switchable/defeatable clip limiters

Click here to learn more about Used Qsc Plx1802 Professional Power Amplifier 889406743946

The PLX1802 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX1802 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC’s years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight Technology PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second; the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier’s output section. The power supply doesn’t sag so bass notes stay full and powerful while the high end remains crisp and clean. Audio Quality PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. Stereo: 900W/ch @ 2 ohms, 575W/ch @ 4 ohms, 330W/ch @ 8 ohms Bridged mono mode: 1800W @ 4 ohms, 1200W @ 8 ohmsStereo: 900W/ch @ 2 ohms, 575W/ch @ 4 ohms, 330W/ch @ 8 ohms Bridged mono mode: 1800W @ 4 ohms, 1200W @ 8 ohms Very lightweight (21 lbs.) Advanced cooling design with front exhaust Power, clip, -10dB, and signal present LEDs Front-panel gain controls Balanced XLR inputs with TRS connectors PowerLight power supply Clip limiting Thermal limiting Speakon NL4 and binding post outputs 100Hz high-pass and low-pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover Switchable/defeatable 33Hz infrasonic filters protect woofers from over-excursion damage Switchable/defeatable clip limiters

Click here to learn more about Used Qsc Plx1802 Professional Power Amplifier