Home Recording Studio Center

Wrought Iron Oval Pot Rack (12021); Dimensions 17″ x 32-1/2″; Includes: chrome plated grid, 4 – black ceiling hooks, 8 black “S” hooks, 12 black “J” hooks, 4 – 22″ chains….

Click here to learn more about Innova Classicor Wrought-Iron Oval Pot Rack

Electrostatically painted for long lasting good looks. 14 1 2″ H. x 12 1 2″ W. x 2 3 4″ D. Black….

Click here to learn more about Spectrum Wall-Mountable Black Scroll Spice Rack

Keep oft-used cooking knives close at hand without the counter space demands of a knife block with this handy magnetic storage strip from Chicago Cutlery. With 75 years experience crafting fine knives and related kitchen products, Chicago Cutlery understands the importance of proper, and safe, knife storage. The magnetic storage strip can be affixed to any wall for immediate access, whether over a…

Click here to learn more about Chicago Cutlery 1063947 Magnetic Knife Storage Strip

These durable pullout waste containers are packaged fully assembled and carry the standard Rev-A-Shelf LIFETIME GUARANTEE…

Click here to learn more about Rev-A-Shelf 20Qt Pull-Out Waste Bin White

White battery organizer holds up to 66 different size batteries. It is designed so it can be hung or stored flat. Keeps batteries at your fingertips and easy to find. It features a removable battery tester.

Product Description
Battery Storage with Testerholds up to 61 batteries (10 AAA, 25 AA, 8 9v, 10 C,and 8 D batteries). Wall mounts or fits in drawer. Includes battery tester, no battery requir…

Click here to learn more about Range Kleen WKT4162 Battery Storage Rack

Expand your data center with this Dell PowerEdge 2950 2U rackmount server. This server features two Intel 3.0GHz dual-core Xeon processors, two 73GB hard drives and 4GB of PC2-5300 Fully Buffered memory.

Click here to learn more about Dell PowerEdge 2950 2U 2 x 3GHz 2 x 73GB RAID DRAC Rackmount Server (Refurbished)

Supercharge your data center with this DELL PowerEdge 1850 1U rackmount server. Each individual server features 2 x 2.8GHz Single Core Intel Xeon processors, 2 x 73GB 3.5-inch 10K SCSI hard drives and 2GB of ECC Registered memory.

Click here to learn more about DELL PowerEdge 1850 2 x 2.8GHz 2 x 73GB Rackmount Server (Refurbished)

Cisco Catalyst WS-C2960S-48LPD-L Stackable Ethernet Switch – 48 Port – 3 Slot

Click here to learn more about Cisco Catalyst WS-C2960S-48LPD-L Stackable Ethernet Switch – 48 Port

Expand your data center with this Dell PowerEdge 1750 1U rackmount server. This server features two Intel 3.0GHz Xeon processors, two 36GB hard drives and 2GB of ECC registered memory.

Click here to learn more about Dell PowerEdge 1750 Server (Refurbished)

IOCell NetDISK 352UN NAS Hard Drive Array – 4 TB Installed HDD Capacity

Click here to learn more about IOCell NetDISK 352UN NAS Hard Drive Array – 4 TB Installed HDD Capaci

Supercharge your data center with this DELL PowerEdge 2850 2U rackmount server. This used server features two 3.2GHz Single-core Intel Xeons processors, two 73GB 3.5-inch SCSI and 4GB ECC Registered memory.

Click here to learn more about DELL PowerEdge 2850 2x 3.2GHz / 4GB / 2x 73GB + RAID Server (Refurbished)

At the core of this Dell Precision 64-bit dual-socket workstations is the Intel 5400 chipset, designed to support the technologies that can open up performance-impacting bottlenecks in primary subsystems.

Click here to learn more about Dell Precision T7400 3.0GHz 3x 160GB Tower Workstation (Refurbished)

Synology DX510 Hard Drive Array

Click here to learn more about Synology DX510 Hard Drive Array

Netgear ProSafe GS752TXS Ethernet Switch

Click here to learn more about Netgear ProSafe GS752TXS Ethernet Switch

StarTech.com Video Extender

Click here to learn more about StarTech.com Video Extender

This hatched MDY-12 cymbal mount is designed for V-Cymbal Pads. It features a flexible ball-clamp, a foldable boom arm, and a hatched clamp that’s compatible with all Roland MDS Series drum rack hardware for expandability. Setup and teardown is fast and easy with this Roland cymbal mount.Flexible ball-clamp Foldable boom arm Hatched clamp Compatible with all Roland MDS Series drum rack hardware

Click here to learn more about Roland Hatched Cymbal Mount For Mds Rack Hardware

This rock solid hatched drum pad mount features a hatched clamp for easy setup and teardown. It’s compatible with all Roland MDS Series rack hardware so you can easily expand your Roland V-drum kit with more drum trigger pads.Hatched clampCompatible with all Roland MDS Series drum rack hardware

Click here to learn more about Roland Hatched Pad Mount For Mds Rack Hardware

Mount your MX12/4 securely in a rack with this custom-made hardware from Yamaha. When mounted in this kit, the MX12/4 faces the front for easy access to all of the controls. A tip: leave an open rack space above the MX12/4 and route all of the cables out of your way and to the rest of your rack.

Click here to learn more about Yamaha RK1 Rack Ears for the MX124

10/32 x .75 in. black oxide, phillips truss head screws with #10 nylon washers to prevent scratching equipment.

Click here to learn more about RaXXess Rack Hardware with Washers

The rackmount kit for VX-351 and moogerfooger CP-251 is 3 rackspaces high, and is designed to fit any standard 19″ equipment rack. It comes with all the necessary hardware and instructions for assembly and installation. This kit can be used to mount the following combinations:One VX-351 and one CP-251One VX-351One CP-2512 VX-351s2 CP-251s

Click here to learn more about Moog Vx-351 Rack Mount Kit

The SKB line of stackable racks have received worldwide acclaim for durability, convenience, and easy handling. Made of ultra-high molecular weight polyethylene, they are less than half the weight of old fashioned wood racks and provide maximum protection. Front and rear covers are gasket sealed to protect equipment from moisture and dirt. Mounting equipment is a snap with provided hardware.

Click here to learn more about SKB 6 Unit Effects Rack Mount Case

The SKB line of stackable racks have received worldwide acclaim for durability, convenience, and easy handling. Made of ultra-high molecular weight polyethylene, they are less than half the weight of old fashioned wood racks and provide maximum protection. Front and rear covers are gasket sealed to protect equipment from moisture and dirt. Mounting equipment is a snap with provided hardware.

Click here to learn more about SKB 10 Unit Effects Rack Mount Case

The SKB line of stackable racks have received worldwide acclaim for durability, convenience, and easy handling. Made of ultra high molecular weight polyethylene, they are less than half the weight of old fashioned wood racks and provide maximum protection. Front and rear covers are gasket sealed to protect equipment from moisture and dirt. Mounting equipment is a snap with provided hardware.

Click here to learn more about SKB 12 Unit Effects Rack Mount Case

The SKB line of stackable racks have received worldwide acclaim for durability, convenience, and easy handling. Made of ultra-high molecular weight polyethylene, they are less than half the weight of old fashioned wood racks and provide maximum protection. Front and rear covers are gasket sealed to protect equipment from moisture and dirt. Mounting equipment is a snap with provided hardware.

Click here to learn more about SKB 4 Unit Effects Rack Mount Case

The SKB line of stackable racks have received worldwide acclaim for durability, convenience, and easy handling. Made of ultra-high molecular weight polyethylene, they are less than half the weight of old fashioned wood racks and provide maximum protection. Front and rear covers are gasket sealed to protect equipment from moisture and dirt. Mounting equipment is a snap with provided hardware.

Click here to learn more about SKB 8 Unit Effects Rack Mount Case

This pack of audio rack hardware includes 12 sets of rack rail clip nuts and bolts.

Click here to learn more about Skb Skb19-Ac1 Rack Hardware

This hardware kit allows you to mount a single rack space device to your Standtastic keyboard stand. An excellent way to keep your sound gear near your electronic keyboard.

Click here to learn more about Standtastic Rack Mount Kit for Keyboard Stands

This hardware kit allows you to mount a single rack space device to your Standtastic keyboard stand. An excellent way to keep your sound gear near your electronic keyboard.

Click here to learn more about Standtastic Rack Mount Kit For Keyboard Stands

All On-Stage flight rack cases are engineered with ATA-style hardware, recessed latches and handles and pre-mounted rubber feet. On-Stage flight rack cases are also outfitted with a 9mm Heavy-duty plywood enclosure and aluminum skeletal structure with front and rear rack rails. Includes rack screws and washers.

Click here to learn more about On-Stage Flight Rack Case

This rock-solid Roland MDH12 Hatched Drum Pad Mount features a hatched clamp for easy setup and teardown. It’s compatible with all Roland MDS-series drum-rack hardware so you can easily expand your kit with more trigger pads like the Roland PD series.

Click here to learn more about Roland MDH12 Hatched Pad Drum Mount

Color: Steel Type: Wall-mount magazine rack Materials: Tubular steel Hardware finish: Steel Number of shelves: One Dimensions: 15.375 inches high x 13.5 inches wide x 4.125 inches deep Assembly required

Click here to learn more about Wall-mount Magazine Rack