Home Recording Studio Center

Color:Wood Shelf On Wheels, the expanding kitchen cabinet shelf, offers a customized fit with no measuring, cutting, sawing, or leveling. It take minutes for installation, just screw in 8 screws, expand and insert, that’s it, you’re done! No more bending down to look in the back of your cabinets. Now you have everything at your fingertips from front to back with a simple pull. Great for cabinets…

Click here to learn more about Shelf On Wheels Expandable Pull-Out Kitchen Cabinet Shelf, Wood

An organized kitchen makes for faster and sometimes more hygienic food preparation. This stylish brushed 18/10 stainless-steel cutlery organizer will keep all your utensils in one place so you can set the table and have a meal in no time. Measuring 13-3/4 by 9-3/4 by 2 inches, the tray has five storage slots for utensils. A longer vertical slot holds serving utensils, while three adjacent slots ac…

Click here to learn more about MIU France Brushed Stainless Steel Cutlery Tray, 5-Slots

As its title makes clear, the 1991 sequel to Bonnie Raitt’s platinum breakthrough on Nick Of Time takes nothing for granted. Raitt had achieved sobriety, renewed commercial focus, and then the payday that the prior album yielded, but Luck Of The Draw mirrors an even fiercer determination to make music as if her life depended on it. Again teamed with producer Don Was, Raitt surpasses herself with h…

Click here to learn more about Luck of the Draw

Rugged, high-impact polystyrene frame resists damage in shipping and storage. Frame back interlocks into face of cabinets to endure abuse and extreme temperatures. No glued backs to fall apart. Cabinets stack or wall mount….

Click here to learn more about Akro-Mils 10764 64-Drawer Plastic Parts Storage Hardware and Craft Cabinet, 20-Inch by 16-Inch by 6-1/2-Inch, Blue/Grey

5-ft. workbench with 2 drawers includes ball bearing drawer glides for 100-lb. capacity each. U.S.A. Capacity (lbs.): 100, Material: 11 and 16-ga. steel, Top Material: Pegboard and particleboard, Dimensions W x D x H (in.): 60 x 24 x 60, Drawers (qty.): 2, Includes: Two-way cantilever shelf…

Click here to learn more about Gorilla Rack GR2102B 5-Feet Workbench with 2 Drawers, Black

The RaXXess SFG flanged steel rack panel features 16-gauge, cold rolled steel; it has a 1/2 inch flanged for additional strength. Perfect for use where economy is the key. Textured finish as well.

Click here to learn more about RaXXess SFG Flanged Steel Rack Panel

This great 11-gauge steel rack rail is punched and tapped for 10-32 in. screws. It is full hole rack rail with holes tapped at 5/8 in. – 5/8 in. – 1/2 in. Sold in pairs. Finished in a high-quality brushed black anodized finish.

Click here to learn more about RaXXess Rack Rail

The SKB Roto Rack Case is a 10U slanted top and 6U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the new AV-8 with the lid closed!

Click here to learn more about SKB Roto Rack Case

The simplest of designs, these knock down economy racks are black oak laminate over 5/8 inch medium density fiberboard. They provide a very economical yet attractive means for rack mounting audio gear in home studios or smaller installations. Assembly hardware and 11-gauge steel rack rail are provided.

Click here to learn more about RaXXess ER Economy Rack Kit

Gen16 has designed a drum rack based on designs similar to those used in machine equipment and airframe design. This rack is both lighter and stronger than conventional steel drum racks, and perfect for both acoustic and electric percussion setups.

Click here to learn more about Zildjian GEN16 Acoustic Electric Drum Rack

The SKB R102 Audio and DJ Rack Case is a 10U slanted top and 2U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the new AV-8 with the lid closed!

Click here to learn more about SKB R102 Audio and DJ Rack Case

The simplest of designs, these knock down economy racks are black laminate over 5/8″ medium density fiberboard. They provide a very economical yet attractive means for rack mounting audio gear in home studios or smaller installations. Assembly hardware and 11-gauge steel rack rail are provided.

Click here to learn more about RaXXess ER12 12-Space Economy Rack (Black Oak)

These easy-to-install shelves fit all components up to 17-3/8 in. wide to quickly meet all of your rackmounting needs. The shelf is made from 16-gauge steel, and each unit is individually boxed.

Click here to learn more about RaXXess UTS Rack Shelf

The Elite Series of fine audio racks are of knock down construction using the highest grade of fused 3/4″ Melamine. They come equipped with 11-gauge steel rack rail and the finest knockdown furniture hardware available, ensuring the customer a solidly constructed and durable unit. Furniture grade casters are standard on 12 spaces and larger.

Click here to learn more about RaXXess 20-Space Elite Rack (Ebony Fleck)

The simplest of designs, these knock down economy racks are black oak laminate over 5/8 in. medium density fiberboard. They provide a very economical yet attractive means for rack mounting audio gear in home studios or smaller installations. Assembly hardware and 11-gauge steel rack rail are provided.

Click here to learn more about RaXXess 12-Space Over 16-Space Economy Rack (Black Oak)

The 1SKB-R104 is a 10U slanted top and 4U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the new AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front and rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA locking SKB patented trigger latches secure the lid while the flat hard top allows for stacking in transport and storage.

Click here to learn more about SKB R104 Audio and DJ Rack Case

Designed as a complete upgrade and stronger alternative to the existing Roll-X-Rack models, the new Roto Rolling Racks feature industrial grade steel threaded rack rails (allowing non-destructive screw mount installation and removal) and full access rear lids. An optional rear-rack rail add-on (RRK4 or RRK6 kit) allows enhanced load capacity and stability, ideal for especially heavy weighted power amplifier units.

Click here to learn more about SKB R4W 4 Unit Roto Rolling Rack Case

Designed as a complete upgrade and stronger alternative to the existing Roll-X-Rack models, the new Roto Rolling Racks feature industrial grade steel threaded rack rails (allowing non-destructive screw mount installation and removal) and full access rear lids. Rear rack rail are included which allows enhanced load capacity and stability, ideal for especially heavy weighted power amplifier units.

Click here to learn more about SKB R6W 6 Unit Roto Rolling Rack Case

The Elite Series of fine audio racks are of knock down construction using the highest grade of fused 3/4″ melamine. They come equipped with 11-gauge steel rack rail and the finest knockdown furniture hardware available. The depth has been increased to 20″ to accommodate all gear options. Attractive plexi front doors and solid melamine rear door are now offered as options. Available in ebony fleck. Furniture grade casters are standard on 12 spaces and larger.

Click here to learn more about RaXXess 8-Space Elite Rack (Ebony Fleck)

The Elite Series of fine audio racks are of knock down construction using the highest grade of fused 3/4 inch melamine. They come equipped with 11-gauge steel rack rail and the finest knockdown furniture hardware available. The ERK has a depth of 20 inches to accommodate all gear options. Attractive plexi front doors and solid melamine rear door are now offered as options. Available in ebony fleck and maple. Furniture grade casters are standard on 12 spaces and larger.

Click here to learn more about RaXXess ERK20M 20-Space Elite Rack (Maple)

This is Raxxess’s one space, 14-gauge steel rack shelf.

Click here to learn more about RaXXess Universal Shelf (1 Space)

Fully enclosed construction is of 16-gauge steel with a black semi-gloss finish. New 12 in. cabinet grade slides allow for full extension. Perfect for anything from pencils, papers and strings to cassettes, cds and tools.

Click here to learn more about RaXXess ESD Economy Sliding Rack Drawer

Middle Atlantic’s RC and CAP Series clamping rackshelves offer an economical and highly functional solution for components that require captivation. Equipped with rubber-lined clamps which secure your component from the top, all RC and CAP Series products are additionally outfitted with adjustable “L” brackets in back to provide an optimally secure fit. Vented bottoms offer superior cooling, while a robust 16-gauge steel design maintains structural integrity even on the road.

Click here to learn more about Middle Atlantic Clamping Shelf for Rack Mount

The Ultimate Strength Series is the best in American technology. This new 2U version has been added to complete the line up of Ultimate Series racks. With its roto molded tough shell, front and rear lids, recessed heavy-duty twist latches, molded in handles, shock absorbing rubber feet and the recognizable patented deep Roto-X pattern for solid stackability, these cases provide maximum protection. The unique molded-in unbendable valance and steel threaded rails make the Ultimate Strength Series Roto-Racks the new professional standard in the industry.

Click here to learn more about SKB Ultimate Strength Series Roto Rack Case

The Avalon RM-1 converts a single U5 or M5 to a standard 19 in. rack system. The kit includes 2 steel rack ears and 8 stainless steel screws.

Click here to learn more about Avalon RM1 1-Unit Rackmount Kit for U5