Home Recording Studio Center

Pocket-sized unit converts 12V DC power from vehicle battery into 120V AC power, so you can charge or operate laptops, cell phones, IPod , BlackBerry , video cameras and other mobile electronics. Power Supply: 12V, Continuous Watts: 100, AC Outlets (qty.): 1, Needs to be Hardwired: No…

Click here to learn more about Duracell 813-0281-07 100 Watt DC to AC Pocket Power Inverter

The Sunforce 1000 Watt pure sine inverter converts 12V DC to 110V AC of pure sine wave power. Operates pumps, mini motors and appliances that won’t run on modified sine wave inverters. Power Supply: 12V DC, Continuous Watts: 1,000, Surge Watts: 2,000, Surge Amps: 16, AC Outlets (qty.): (2) 110V, DC Outlets (qty.): 1, LED Indicators: Yes, Modified Sine Wave: No, True Sine Wave: Yes, Soft Start Tech…

Click here to learn more about Sunforce 11240 1000 Watt Pure Sine Wave Inverter with Remote Control

The Sunforce 2500 Watt Pure Sine Wave Inverter is the perfect solution to power home appliances directly from your 12 volt battery. Pure Sine Wave inverters provide clean power with very low harmonic distortion, no static or humming noise. As a result, this inverter will supply stable power to run small electronic tools, air pumps, electronic doors, small motors and refrigerators that a modified s…

Click here to learn more about Sunforce 11260 2500 Watt Pure Sine Wave Inverter

The Polar USB Infrared Interface Unit is for downloading data to PC via infrared.Compatible with all versions of CS600X, CS400, RS800CX, RS400…

Click here to learn more about Polar IrDA USB Adapter Interface

Featuring a simple yet flexible design, the Plugable 10 Port USB 2.0 Hub provides easy expansion for any USB capable system. All upstream and downstream ports are on the front and back sides of the hub, minimizing desktop cable clutter. Two ports swivel to a vertical position to allow easy insertion of USB flash drives and other devices with one hand. Able to draw power and supply downstream devic…

Click here to learn more about Plugable USB 2.0 10 Port Hub (with Power Adapter)

This USB 2.0 to IDE, SATA converter cable allows you to use your 2.5-inch or 3.5-inch IDE hard drive or SATA hard disk as an additional external hard drive. The SATA, IDE device connects to your computer through a USB port.

Click here to learn more about USB 2.0 to IDE/ SATA Converter Cable

This USB 2.0 to IDE, SATA converter cable uses your 2.5-inch or 3.5-inch IDE hard drive or SATA hard disk as an additional external hard drive. The SATA, IDE device connects to your computer through a USB port.

Click here to learn more about USB 2.0 to IDE/ SATA Converter Cable

This pack of 2 USB 2.0 to IDE, SATA converter cable allows you to use your 2.5-inch or 3.5-inch IDE hard drive or SATA hard disk as an additional external hard drive. The SATA, IDE device connects to your computer through a USB port.

Click here to learn more about USB 2.0 to IDE/ SATA Converter Cable (Pack of 2)

Keep your electronic devices connected with a display port to HDMI adapterComputer accessory features a male DP end and a female HDMI endAdapter converts your DisplayPortTM port to HDMI

Click here to learn more about Male DisplayPort to Female HDMI Adapter

Use splitter to convert and increase your ethernet connectionsNetworking device allows two computers to share high speed DSL, cable modem and ethernet portsKMV switch converts a single RJ45 outlet to two RJ45 sockets easily

Click here to learn more about RJ45 Light Beige 1×2 Ethernet Connector Splitter

IMC AccessConverter/3 Multi-port Media Converter RoHS Complaint

Click here to learn more about IMC AccessConverter/3 Multi-port Media Converter RoHS Complaint

Keep your electronic devices connected with a display port to DVI-D adapterComputer accessory features a male DP end and a female DVI-D endAdapter converts your DisplayPortTM port to DVI

Click here to learn more about Male DisplayPort to Female DVI-D Adapter

The Sonuus i2M Musicport is the new way to connect your musical instruments to your computer. It combines a high impedance audio interface that won’t suck the tone from your instrument, with very fast, low latency, monophonic MIDI conversion that doesn’t require special pickups to be mounted onto your instrument.

Click here to learn more about Sonuus i2M Musicport MIDI Converter and Hi-Z USB Audio Interface

Shape your sound with the perfect tone — using your Mac or PC! The Alesis GuitarLink Plus combines Alesis’ GuitarLink guitar-to-USB cable with Native Instruments Guitar Rig LE software to empower every guitarist with the processing capability of his or her computer.

Click here to learn more about Alesis GuitarLink Plus USB Guitar Interface Cable

StealthPlug is the first compact 1/4 in. jack to USB audio interface cable for Guitar and Bass players to plug into the world of software-based amp/effects modeling and recording.

Click here to learn more about IK Multimedia StealthPlug Guitar/Bass USB Audio Interface Cable with Plug-Ins

The Yamaha i-MX1 is a MIDI interface cable which enables iPad / iPhone to be connected to any MIDI instrument. There is no difficult setup, simply connect i-MX1 between iPad / iPhone and a MIDI instrument such as synthesizer, electronic drum kit, digital piano before launching the Apps from your iPad / iPhone.

Click here to learn more about Yamaha i-MX1 MIDI interface for iOS devices

This USB 2.0 to IDE, SATA converter cable uses your 2.5-inch or 3.5-inch IDE hard drive or SATA hard disk as an additional external hard drive. The SATA, IDE device connects to your computer through a USB port.Compliant with USB 1.1 and 2.0 standardsUSB 2.0 interface for 480 Mbps high speed data transferPlug-n-playAC input voltage: AC 90v-264vSupports Windows ME, 2000, XP, Vista and Mac OSPackage includes:USB to IDE, SATA cable adapterSATA data cableAC adapterAC to IDE power converterIDE to SATA power cableWarning: California residents only, please note per Proposition 65 that this product may contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Click here to learn more about USB 2.0 to IDE/ SATA Converter Cable

The Icicle is Blue’s new stylish USB converter and mic preamp combo that allows you to connect any XLR microphone directly into your computer via USB! The Icicle features a studio quality microphone preamp, 48V phantom power, fully balancedlow noise front end, analog gain control, and driverless operation. Setup is a snap! The Icicle works with both dynamic and condenser microphones, providing high quality and hassle-free connectivity with Mac or PC. Whether you’re using amicrophone for digital recording, podcasting, voice messaging, or voice recognition applications, the Icicle is the quick and easy way to get connected.

Click here to learn more about BLUE Icicle USB Microphone Interface

The Apogee JAM Interface Package includes the Apogee JAM Guitar Interface, Audio-Technica ATH-M20 Closed-Back Headphones, and a ¼” to 1/4” audio cable. Apogee JAM Guitar Interface JAM brings the legendary sound quality of Apogee to iPad, iPhone and Mac. Now guitarists can have a pocket-sized, plug in and play interface at an unprecedented price and experience ultimate tone with the guitar amps and effects in Apple”s GarageBand software or other compatible applications. Apogee JAM Key Features: PureDIGITAL instrument connection for pristine sound quality Designed specifically for electric guitar and bass No configuration, just plug in and play Easily adjust input levels for any instrument Multicolor LED for status indication and input level monitoring Made for GarageBand, Logic, and MainStage Apogee JAM is a premium digital converter featuring PureDIGITAL technology which delivers your guitar”s true tone to your iPad or Mac without compromise. JAM is the first high quality interface that makes a digital connection to both iOS devices and Mac. You will notice the sonic difference between JAM and other similar products immediately. Who is JAM for? JAM is great for beginners and advanced players who want a high quality guitar sound for practicing, recording, or just jamming on both iPad and Mac. Ready to rock – status and level indication It”s easy to tell if JAM is connected properly by the status LED on the top panel. If it”s green, you are ready to rock and the light becomes your input level indicator. If it turns red, you are rocking too hard and you need to turn your gain down with the control knob. Crank it up and dial it in with easy level control JAM features an input gain control knob. This rotary style wheel is conveniently located on the side of JAM for easy thumb access and allows you to dial in the level of your guitar without accessing software. Did you know? JAM is a true digital device featuring special circuitry designed specifically for guitar and bass. The Apogee engineers responsible for JAM”s sound quality have created professional audio hardware found in recording studios around the world and heard on countless hit records. Audio-Technica ATH-M20 Closed-Back Headphones Audio-Technica ATH-M20 closed-back headphones feature 40mm drivers with neodymium magnets and copper-clad aluminum wire voice coils for exceptional clarity, rich bass, and extended high-frequency response. The circumaural, closed-back design on these Audio-Technica headphones ensure superior isolation. Lightweight with an adjustable cushioned headband for maximum comfort. 1/8″ (3.5 mm) stereo connector and snap-on 1/4″ (6.3 mm) adapter. 10′ coiled cable with left-side entry. Apogee JAM Guitar Interface PureDIGITAL instrument connection delivers pristine sound quality Designed for electric guitar and bass No confusing setup, you can start recording in minutes Works with GarageBand on iPad and iPhone or wit

Click here to learn more about Apogee Apogee Jam Interface Package

If you’re serious about digital audio, you can’t settle for anything less than a truly professional audio interface … now with Mia MIDI you don’t have to. Mia MIDI offers a pair of balanced 1/4 in. analog inputs and outputs and operates at the +4dBu levels used by pro-audio gear. It combines this with 24-bit/96kHz converters and 106 dB of dynamic range for the quality your recordings deserve. Also included is an S/PDIF digital audio interface for connecting to other digital audio equipment, and MIDI input/output jacks on a custom molded cable.

Click here to learn more about Echo Mia MIDI PC Digital Audio Interface

The Focusrite Scarlett 18i6 is an 18 in / 6 out USB 2.0 audio interface designed to make home multitrack recording a breeze. Alongside two award-winning Focusrite preamps, six high-quality analogue inputs allow you to simultaneously record guitar, bass, vocals and keys. You don’t need to stop there either – pop in the ADAT optical cable from an outboard eight-channel mic pre unit such as the Focusrite OctoPre MkII and you can track the drums at the same time.

Click here to learn more about Focusrite Scarlett 18i6 USB Audio Interface

The RME Babyface USB audio interface is equipped with the latest 192kHz AD/DA-converters and 2 reference-class microphone preamps, delivering top sound in an attractively shaped enclosure. When it comes to sound quality and price-to-performance ratio, RME is in a league of its own, and Babyface is no exception. It combines excellent analog circuit design with high-grade AD/DA converter chips. Additionally, RME’s famous SteadyClock ensures jitter-free conversion of the highest quality.Both digitally controlled preamps provide individually switchable 48V phantom power. Gain of up to 65dB (adjustable in steps of 1dB over a range of 55dB), exceptional EIN performance (even at low amplification settings), and extremely low THD+N values) are why these preamps surpass those that cost several times the price of the Babyface. All level settings are 100% recallable by the setup software and can be easily adjusted. Multi-formatBabyface’s incredible feature set includes an optical TOSLINK I/O, usable as an ADAT port with SMUX support, or SPDIF at up to 192kHz. In combination with an ADAT converter, such as the RME ADI-8 DS/QS or OctaMic II, the Babyface provides an incredible amount of 10 analog input and 12 output channels.Analog I/Obalanced XLR I/O and TRS outputs employing RME’s analog circuit expertise guarantee outstanding low noise and distortion values. The latest generation AD/DA converters provide sample rates up to 192kHz with a signal-to-noise ratio of up to 115dBA. Due to its efficient jitter reduction, SteadyClock guarantees pristine sound quality, even when clocking to an external digital source. MIDI I/Othe integrated MIDI I/O completes the list of features and turns the Babyface into a creative audio system of universal usability. Do what you want wherever you want! Instrument Inputdirectly plug in your guitar or other instruments by switching one input to Hi-Z input mode. Recording any instrument becomes a breeze and does not require any other hardware. Perfect Controlwith one main control knob and two buttons, the elegantly designed Babyface acts as a direct desktop control for all typical studio tasks including volume control, reference volume store and recall, volume dim, input selection/switching, and input gain control, with quick and easy access to all functions. LED bars serve as both level meter and gain meters, visually supporting the precise control of all inputs, outputs and headphone levels directly at the interface.USB by RMEthe Babyface provides RME’s unmatched USB technology for revolutionary ultra-low latencies on Mac and PC. Under both operating Systems the available latencies are simply sensational and provide an exceptional performance.Full mobilitythe ultra-portable Babyface offers bus-powered operation via two USB connectors (USB power cable included). This turns the Babyface into the perfect partner for mobile recording of live performances, composing sessions in a park or coffee shop, or just wherever you go. Even if

Click here to learn more about Rme Babyface Usb 2.0 Interface

The ADA8000 is a state-of-the art 8-channel A/D and D/A converter with 8 built-in IMP microphone preamplifiers. This ultra-compact 19 in. unit gives you the opportunity to connect analog audio signals directly to a multi-track recorder or similar equipment via the integrated ADAT(R) interface — and needs only 1 rack space for this purpose! In return, you can even connect the digital signal of a multi-tracker via ADAT(R) to the 8 analog line outputs of your ADA8000.

Click here to learn more about Behringer ADA8000 Ultragain Pro 8-Channel A/D D/A Converter

The MOTU 8pre FireWire audio interface delivers everything you need to turn your computer into a powerful 24-bit/96kHz digital audio workstation. The 8pre provides 8 microphone/instrument preamps and 8 channels of ADAT optical digital I/O. Expand your system by connecting additional 8 pres or other MOTU FireWire audio interfaces.The 8pre as your primary audio interfaceUse the included CueMix software to mix all 16 inputs from your computer. Eight channels of ADAT optical I/O make the 8pre an ideal companion for a digital mixer. 2 ADAT lightpipe connections work together to support a full 8 channels of optical digital I/O at anysample rate up to 96kHz.Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines, and even effects processors. Then monitor all of these live inputs via the 8pre’s main outs or headphone jack with virtually no monitoring latency and no processor drain on your computer. You can even create separate monitor mixes for the main outs and headphones. Control everything, including talk-back and listen-back, from the included CueMix Console software, just like a large studio console.The 8pre includes a 16-channel MIDI interface. Simply plug-in your FireWire cable, and both MIDI and audio are ready to go. Connect anyMIDI device, such as a controller keyboard, synth module, automated control surface, or drum machine. Timing is sample-accurate with supporting software.The 8pre provides cross-platform compatibility with Mac OS X 10.3 or higher, Windows XP and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac OS, with24-bit recording/editing and 32-bit mixing/processing/mastering.The 8pre as a microphone preamp expansion interfaceThe 8pre is really two products in one. When it is not connected to a computer via FireWire, the 8pre functions as an eight-channel analogto digital (optical) converter. Connect the 8pre to your MOTU 828, 896, Traveler, or even another 8pre via the optical light pipe connectionto add eight high-quality microphone pre-amps to your system. Since the connection is digital, 100-percent pristine sound is maintained, down to the very last sample.The 8pre is the perfect way to instantly add 8 more mic inputs to any audio interface or digital mixer with optical I/O. If you have a MOTU interface with on-board CueMix DSP mixing, such as the 828mkII, 896HD, or Traveler, the 8pre inputs appear directly in the host interface’s CueMix mixer to becomes a transparent extension of your system, operating together with your primary interface as a single, integrated unit even when the host interface is not connected to a computer and is instead operating as a stand-alone mixer.If you have a 2408mk3, digital mixer or other

Click here to learn more about MOTU 8pre 16×12 FireWire Audio Interface