Home Recording Studio Center

With the rise in popularity of expensive bicycles, storage and safety have become an issue. Bikes stored one on top of the other in a garage or hanging from a ceiling can be dangerous for small children or can fall and damage not only the bike, but an expensive automobile or truck. The PBS-2R Racor Bike Stand will securely store two bikes in either direction and can be used indoors or can be secur…

Click here to learn more about Racor PBS-2R Two-Bike Floor Bike Stand

…

Click here to learn more about Racor Pro PLB Freestanding Bike Stand

This ceiling-mounted garage elevator lets you load and lift storage items overhead, out of the way, without a ladder. Simply load the 4-by-4-foot steel platform while you safely stand on the ground, then raise it to the ceiling by cranking the handle. It’s great for boxes, tires, large tools, snowblowers, ladders, lumber, third-row car seats, canoes, kayaks, and more….

Click here to learn more about Racor PHL-1R Pro HeavyLift 4-by-4-Foot Cable-Lifted Storage Rack

This bike lift is a terrific way to use unused space with ease and safety. Its unique rope locking mechanism prevents accidental release. The ingenious design lightens the load for easy lifting. For use on ceilings up to 14-feet, it has a load capacity of 50 pounds….

Click here to learn more about Racor PBH-1R Ceiling-Mounted Bike Lift

…

Click here to learn more about Lisle 20130 Magnetic Glove Dispenser

D-Link ShareCenter Pro DNS-1100-04 NAS Hard Drive Array

Click here to learn more about D-Link ShareCenter Pro DNS-1100-04 NAS Hard Drive Array

Never be without a needed supply with a multi-use truck rackTruck exterior accessory mounts to either side of the bedCargo carrier bases are bolted to front and rear truck bed

Click here to learn more about Multi-use Truck Rack

2 Turntable/8 Line Level (CD, Cassette Deck, Minidisk, Etc)/ 2 Mic Inputs7-Band Graphic Equalizer for Right Left ChannelsIndividual Rotary Controls for Mic Bass Treble

Click here to learn more about Pyramid 19-inch Rack Mount 4-channel Professional Mixer (Refurbished)

Crank up the sound with this 19-inch rack mount 4-channel professional mixerAudio/video accessory has two mic inputs and up to eight line inputsSound mixer has two turntable inputs with ground screw

Click here to learn more about PylePro 19-inch Rack Mount Professional Mixer

4 x U 19-inch rack mount mixer4 x stereo channels3 x band rotary EQ control for MASTER

Click here to learn more about Pyle 19-inch Rack Mount 4-channel Professional Mixer (Refurbished)

Tripp Lite SmartPro SMART2200CRMXL 2200VA Rack-mountable UPS

Click here to learn more about Tripp Lite SmartPro SMART2200CRMXL 2200VA Rack-mountable UPS

Tripp Lite SmartPro Rack/Tower Digital UPS (500VA)

Click here to learn more about Tripp Lite SmartPro Rack/Tower Digital UPS (500VA)

The Pyle Pro PDJ480UM is a rack mountable DJ controller capable of playing MP3 through its USB and SD card slots. This mixer also has a 10 track folder search big LCD display plus ID3 tag capabilities.

Click here to learn more about Pyle Rack Mount DJ Controller Mixer

TrippLite Smart Pro Rackmount UPS (1000VA)

Click here to learn more about Tripp Lite SmartPro 1000RM1U UPS

Cisco SMARTnet

Click here to learn more about Cisco SMARTnet

Mount your Mackie 1642 VLZ3 or VLZ Pro Mixer into your studio or live rack with this rackmount kit. Give your setup that polished look that shows you’re a true pro while keeping your mixer safe from the rigors of the road.

Click here to learn more about Mackie 1642 VLZ Pro And VLZ3 Rackmount Kit

Mount your Mackie 1202 VLZ3 or VLZ Pro Mixer into your studio or live rack with this rackmount kit. Give your setup that polished look that shows you’re a true pro while keeping your mixer safe from the rigors of the road.

Click here to learn more about Mackie 1202 VLZ Pro and VLZ3 Rackmount Kit

Mount your Mackie 1402 VLZ3 or VLZ Pro Mixer into your studio or live rack with this rackmount kit. Keep your mixer safe from the rigors of the road and give your setup that polished look that shows you’re a true professional.

Click here to learn more about Mackie 1402 VLZ Pro and VLZ3 Rackmount Kit

The SKB Roto Rack Case is a 10U slanted top and 6U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the new AV-8 with the lid closed!

Click here to learn more about SKB Roto Rack Case

Rack mounting kit for Evolution Wireless G3 rackmountable devices. Will not mount G1 or G2 devices. Supports up to 2 systems, or one system with AM2 front panel antenna.

Click here to learn more about Sennheiser GA3 Rack Kit

Mount your MX12/4 securely in a rack with this custom-made hardware from Yamaha. When mounted in this kit, the MX12/4 faces the front for easy access to all of the controls. A tip: leave an open rack space above the MX12/4 and route all of the cables out of your way and to the rest of your rack.

Click here to learn more about Yamaha RK1 Rack Ears for the MX124

Odyssey Flight Zone ATA Combo Rack gives you the best of both worlds. Mount mixers, controllers on top for convenient access and all other essentials below.

Click here to learn more about Odyssey Flight Zone Combo Rack

This bracket and rail set allows the CR1604VLZ, VLZPRO, and VLZIII input/output pod to be used in either table-top or rack-mount positions with 7 possible configurations.

Click here to learn more about Mackie RP1604VLZ RotoPod Bracket and Rack Rail Set

The Gator console racks consist of a slanted set of top rack rails perfect for your mixer. For your additional rackable equipment there are also front and rear rack rails. The entire case is constructed of nearly indestructible, lightweight plywood with PVC exterior. This is the perfect case for creating a compact, mobile pro audio setup.

Click here to learn more about Gator GTOUR GRC Console Rack Case

New 10-1/2 in. depth X-Racks accommodate smaller rackmountable equipment such as guitar effects and shallow depth studio effects. Why mount that stuff in larger racks when you don’t need all of that extra depth and weight? With an X-Rack, you need not unplug these components to close the back panel. The X-Rack features a molded-in carry handle. Best of all, you can stack it right on top of your amp.

Click here to learn more about SKB 2-Space X-Rack Effect/Amp Rack (10.5-inch Deep)

New 10-1/2 in. depth X-Racks accommodate smaller, rackmountable equipment such as guitar effects and shallow-depth studio effects. Why mount that stuff in larger racks when you don’t need all of that extra depth and weight? With an X-Rack, you need not unplug these components to close the back panel. The X-Rack features a molded-in carry handle. Best of all, you can stack it right on top of your amp.

Click here to learn more about SKB 3-Space X-Rack Effect/Amp Rack (10.5-inch Deep)

New 10-1/2 in. depth X-Racks accommodate smaller rackmountable equipment such as guitar effects and shallow depth studio effects. Why mount that stuff in larger racks when you don’t need all of that extra depth and weight? With an X-Rack, you need not unplug these components to close the back panel. The X-Rack features a molded-in carry handle. Best of all, you can stack it right on top of your amp.

Click here to learn more about SKB 4-Space X-Rack Effect/Amp Rack (10.5-inch Deep)

Avant Electronics is pleased to introduce the new Avantone PK1 Pro-Klamp, a professional studio and live sound, drum rim mic mount. The chrome plated Pro-Klamp blends perfectly with existing drum hardware, and is of all metal construction. Pro-Klamp has 3 stages of rubber dampening to help isolate the mic from unwanted vibration, insuring a higher quality of sound. Pro-Klamp’s design is finish friendly as well, no more marring the finish of your drums with inferior mic mounts.

Click here to learn more about Avantone PK-1 Pro Klamp Drum Rim Microphone Mount

Racks feature plywood construction, metal hardware, heavy-duty pre-tapped rack rails, recessed large grip handles, recessed flush mount lids with latches, and large heavy-duty stackable ball corners. 2 handles.

Click here to learn more about Odyssey Carpeted Pro Rack 18-1/2 Depth 6 Space

Racks feature plywood construction, metal hardware, heavy-duty pre-tapped rack rails, recessed large grip handles, recessed flush mount lids with latches, and large heavy-duty stackable ball corners. 2 handles.

Click here to learn more about Odyssey Carpeted Pro Rack 18-1/2 Depth 8 Space

Racks feature plywood construction, metal hardware, heavy-duty pre-tapped rack rails, recessed large grip handles, recessed flush mount lids with latches, and large heavy-duty stackable ball corners. 2 handles.

Click here to learn more about Odyssey Carpeted Pro Rack 18-1/2 Depth 4 Space